Asus P1-P5945G User Guide - Page 75
BIOS EHCI Hand-off [Enabled], USB Mass Storage Reset Delay [20 Sec], Emulation Type [Auto], USB 2.0
View all Asus P1-P5945G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
USB 2.0 Controller Mode [HiSpeed] Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [HiSpeed] [Full Speed] BIOS EHCI Hand-off [Enabled] Allows you to enable support for operating systems without an EHCI hand‑off feature. Configuration options: [Enabled] [Disabled] Do not disable the BIOS EHCI Hand-Off option if you are running a Windows® operating system with USB device. USB Mass Storage Device Allows you to configure the USB Mass Storage Class Devices. USB Configuration USB Mass Storage Reset Delay [20Sec] Device #1 Generic 2.0 Reader Emulation Type [Auto] Device #2 Generic 2.0 Reader Emulation Type [Auto] Device #3 Generic 2.0 Reader Emulation Type [Auto] USB Mass Storage Reset Delay [20 Sec] Allows you to configure the number of seconds POST waits for the USB mass storage device after start unit command. Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec] Emulation Type [Auto] When it is set to [Auto], the USB devices that are less than 530MB will emulated as floppy and remaining as hard drive. Forced FDD option can be used to force a HDD formatted drive to boot as FDD (Ex. ZIP drive]. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard disk] 5-20 Chapter 5: BIOS setup