Asus P4P800 Deluxe Motherboard DIY Troubleshooting Guide - Page 54
Creating a New Partition Using Windows* Disk Management
View all Asus P4P800 Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
"RAID Ready" R 4. Create a RAID 0 or RAID 1 volume via the Intel Application Accelerator RAID Edition utility and perform a 'Create from Existing Disk' migration (right-mouse click on 'RAID Volumes' or select option under 'RAID' file menu) 5. When migration is complete, Reboot 6. Optional: Use 3rd party application or Windows* to create and format a new data partition on unused space, if any (see Note below) Note: To ensure that non-Windows* partitions are kept intact, the migration to RAID 0 does not utilize the extra space made available by adding the second hard drive. To take advantage of the extra hard drive space you will need to do one of the following: 1. Create a new partition using Windows Disk Management (See Section 17.4.1 for instructions) or 5. Extend the partition to fill the rest of the available space. Windows does not natively include tools to do this, but there are 3rd party software utilities to accomplish this such as PartitionMagic* or Partition Commander*. 17.4.1 Creating a New Partition Using Windows* Disk Management To create a new partition using Windows* Disk Management, complete the following steps: Complete one of the following Step 1 tasks, then proceed with the remaining steps: 1a. Right-Click 'My Computer', select 'Manage'. In the Computer Management program window, left-click 'Disk Management' in the program tree on the left (located under 'Storage' subsection). or 1b Within the Control Panel (Start/Control Panel), double-click 'Administrative Tools'. In the window that appears, double-click 'Computer Management'. In the Computer Management program window, left-click 'Disk Management' in the program tree on the left (located under 'Storage' subsection). 2. Maximize the Computer Management program window for easier viewing. 3. In the Computer Management program window, you should see your RAID Volume represented as a physical disk. Notice that the RAID Volume size is the size of the two Serial ATA disks combined. At this point, you should see the partitions within the RAID Volume that were originally on the single disk you used as your source. After the partitions, you should see a gray area labeled 'Free Space'. This area will have to be partitioned and formatted before it may be used. 54 User's Manual