Asus P4PE-X P4PE-X User Manual - Page 28
Product introduction
View all Asus P4PE-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5. ATX power connectors (20-pin ATX_POWER1, 4-pin ATX12V1) These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition to the 20-pin ATXPWR connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU. Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate. ® P4PE-X ATXPWR1 ATX12V1 Pin 1 +12.0VDC +5VSB PWR_OK GND +5.0VDC GND +5.0VDC GND +3.3VDC +3.3VDC +12V DC +5.0VDC +5.0VDC GND -5.0VDC GND GND GND PS_ON# GND -12.0VDC +3.3VDC +12V DC GND P4PE-X ATX & Auxiliary Power Connectors 6. Digital audio connector (4-1 pin SPDIF1) This connector is for the S/PDIF audio module that allows digital instead of analog sound output. Connect one end of the audio cable to the S/PDIF Out connector on the motherboard, and the other end to the S/PDIF module. The S/PDIF module is purchased separately. ® P4PE-X +5V SPDIFOUT GND SPDIF1 P4PE-X Digital Audio Connector 1-18 Chapter 1: Product introduction