Asus P4PE-X P4PE-X User Manual - Page 54
Primary VGA BIOS [PCI VGA Card] - usb boot
View all Asus P4PE-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
PCI/VGA Palette Snoop [Disabled] Some non-standard VGA cards, like graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using standard VGA cards, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled] PCI Latency Timer [32] Leave this field to the default setting [32] for best performance and stability. USB 1.1 Controllers [3 Controllers] This field allows you to select the number of USB 1.1 controllers that you wish to activate. Configuration options: [Disabled] [3 Controllers] USB 2.0 Controller [Enabled] This field allows you to enable or disable the onboard USB 2.0 controller. Set to [Enabled] if you wish to install USB 2.0 devices. Configuration options: [Disabled] [Enabled] Primary VGA BIOS [PCI VGA Card] This field allows you to select the primary graphics card. Configuration options: [PCI VGA Card] [AGP VGA Card] [Onboard VGA] The option [Onboard VGA] appears only when the onboard VGA is either used or enabled. Onboard LAN Controller [Enabled] (appears on LAN models only) This field allows you to enable or disable the onboard LAN controller. Configuration options: [Disabled] [Enabled] Onboard LAN Boot ROM [Disabled] (appears on LAN models only) This field allows you to enable or disable the option ROM in the onboard LAN controller chipset. Configuration options: [Disabled] [Enabled] 2-22 Chapter 2: BIOS information