Asus P5B-VM DO P5B-VM DO English Manual E2869 - Page 47

P5B-VM DO R 6. JMicron JMB363® Serial ATA RAID connector (7-pin SATA_RAID1) This connector is for a Serial ATA signal cable. This connector supports a Serial ATA hard disk drive, which you can combine with an external Serial ATA hard disk drive to configure for RAID via the unboard Serial ATA RAID controller. The JMicron controller mode item in the BIOS is set to [BASIC] by default. When set to [RAID], this item allows you to use the connectors to build a RAID set. See section "2.4.6 Onboard Device Configuration" for details. SATA_RAID1 GND RSATA _RXN1 RSATA _RXP1 GND RSATA _TXN1 RSATA _TXP1 GND P5B-VM DO SATA RAID connector Before creating a RAID set using Serial ATA hard disks, make sure that you have connected the Serial ATA signal cables and installed Serial ATA hard disk drives; otherwise, you cannot enter the JMicron® JMB363 RAID utility and SATA BIOS setup during POST. 7. TPM connector (20-1 pin TPM_SLOT) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. See section "2.4.3 TPM Configuration" for details. P5B-VM DO CK_33M_TPM LFRAMEn LRESETn LAD3 +3.3V LAD0 +3.3V x GND LPC.PD# R GND smb_dk_main smb_data_main LAD2 LAD1 GND X SERIRQ X X TPM P5B-VM DO TPM connector ASUS P5B-VM DO 1-35