Asus P5GPL P5GPL English user's manual - Page 71
Graphic Adapter Priority [PCI Express/PCI]
View all Asus P5GPL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
DRAM RAS# Precharge [4 Clocks] Controls the idle clocks after issuing a precharge command to the DDR SDRAM. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] DRAM RAS# to CAS# Delay [4 Clocks] Controls the latency between the DDR SDRAM active command and the read/write command. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] DRAM RAS# Activate to Precharge [15 Clocks] Sets the RAS Activate timing to Precharge timing. Configuration options: [4 Clocks] [5 Clocks] ~ [15 Clocks] DRAM Write Recovery Time [4 Clocks] Sets the DRAM Write Recover Time. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] Hyper Path 2 [Auto] Enables or disables the memory acceleration mode feature. Configuration options: [Disabled] [Enabled] [Auto] Graphic Adapter Priority [PCI Express/PCI] Allows selection of the graphics controller to use as primary boot device. Configuration options: [PCI Express/PCI] [PCI/PCI Express] PEG Buffer Length [Auto] Sets the PCI Express Graphics card buffer length. Configuration options: [Auto] [Long] [Short] Link Latency [Auto] Sets the link latency. Configuration options: [Auto] [Slow] [Normal] PEG Link Mode [Auto] Sets the PCI Express Graphics link mode. Configuration options: [Auto] [Slow] [Normal] [Fast] [Faster] PEG Root Control [Auto] Enables or disables the PCI Express Graphics root control. Configuration options: [Auto] [Disabled] [Enabled] Slot Power [Auto] Sets the slot operating power. Configuration options: [Auto] [Light] [Normal] [Heavy] [Heavier] ASUS P5GPL 2-25