Asus P5M2-M C User Guide - Page 103
Creating a RAID 1 set mirrored
View all Asus P5M2-M C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
5.2.2 Creating a RAID 1 set (mirrored) To create a RAID 1 set: 1. From the utility main menu, select 1. Create RAID Volume, then press . This screen appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU ] Name: RAID Level: Disks: Strip Size: Capacity: Volume1 RAID1(Mirror) Select Disks N/A XX.X GB Create Volume [ DISK/VOLUME INFORMATION ] Enter a string between 1 and 16 characters in length that can be used to uniquely identify the RAID volume. This name is case sensitive and cannot contain special characters. [↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select 2. Enter a name for the RAID 1 set, then press . 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 1(Mirror), then press . 4 When the Disks item is highlighted, press to select the hard disk drives to configure as RAID. The SELECT DISKS screen appears. 5 Use the up/down arrow key to highlight a drive, then press to select. A small triangle marks the selected drive. Press after completing your selection. 6. When the Capacity item is highlighted, key in the RAID volume capacity that you want, then press . The default value indicates the maximum allowed capacity. 7. Press when the Create Volume item is highlighted. This warning message appears. WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): 8. Press to create the RAID volume and return to main menu or to go back to Create Volume menu. 5- Chapter 5: Driver installation