Asus P5Q PRO Turbo User Manual - Page 51
ICH10R Serial ATA connectors 7-pin SATA 1-6, Matrix Storage Technology through the onboard Intel - raid
UPC - 610839170234
View all Asus P5Q PRO Turbo manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4. ICH10R Serial ATA connectors (7-pin SATA 1-6) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Matrix Storage Technology through the onboard Intel® ICH10R RAID controller. Chapter 2 • These connectors are set to Standard IDE mode by default. In Standard IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA RAID set using these connectors, set the Configure SATA as item in the BIOS to [RAID]. See section 3.4.2 Storage Configuration for details. • Before creating a RAID set, refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • You must install Windows® XP Service Pack 1 or later version before using Serial ATA hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if you are using Windows® XP SP1 or later version. • When using hot-plug and NCQ, set the Configure SATA as in the BIOS to [AHCI]. See section 3.4.2 Storage Configuration for details. ASUS P5Q PRO Turbo 2-31