Asus P5Q-VM User Manual - Page 48
ICH10 Serial ATA connectors [red] 7-pin SATA1-6 - ahci
UPC - 610839164943
View all Asus P5Q-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3. ICH10 Serial ATA connectors [red] (7-pin SATA1-6) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives and optical disc drives. • These connectors are set to Standard IDE mode by default. In Standard IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors. See section 2.3.5 Storage Configuration for details. • AHCI mode is not supported in Windows® XP. Connect the right-angle side of SATA signal cable to SATA device. Or you may connect the right-angle side of SATA cable to the onboard SATA port to avoid mechanical conflict with huge graphics cards. right angle side 1-36 Chapter 1: Product introduction
1-36
Chapter 1: Product introduction
Connect the right-angle side of SATA
signal cable to SATA device. Or you may
connect the right-angle side of SATA
cable to the onboard SATA port to avoid
mechanical conflict with huge graphics
cards.
•
These connectors are set to Standard IDE mode by default. In Standard
IDE mode, you can connect Serial ATA boot/data hard disk drives to these
connectors. See section
2.3.5 Storage Configuration
for details.
•
AHCI mode is not supported in Windows
®
XP.
right angle side
3.
ICH10 Serial ATA connectors [red] (7-pin SATA1-6)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives and optical disc drives.