Asus P5S-VM P5S-VM User Manual - Page 18

III. H/W SETUP Motherboard Settings III. HARDWARE SETUP Compatible Cyrix CPU Identification The only Cyrix 6x86-PR166+ CPU that is supported on this motherboard must be Revision 2.7 or later. Look on the underside of the CPU for the serial number. The number should read G8DC6620A or later. 8. Voltage Regulator Output Selection (VID0, VID1, VID2, VID3) These jumpers set the VCORE voltage supplied to the CPU. Switching regulators allow some jumper settings to be the same for two voltages of different power planes. AMD-K6-2 AMD-K6 Pentium MMX (P55C) AMD-K5 IBM/Cyrix 6x86 (M1) IBM/Cyrix 6x86 (M1) (266MHz & faster) (166MHz & faster) (150MHz-233MHz) (75MHz-133MHz) (PR166 & faster) (PR166 & faster) WARNING! Because CPU designs change rapidly, the table below is only intended as a simple guideline and thus may not be true for your CPU. Always refer to the CPU documentation for your CPU's voltage and then set the appropriate VID jumpers according to the CPU Vcore Voltage Selection illustration. Manufacturer CPU Type Single Plane AMD (.25micron) K6-III/400,450 ---- K6-2/450,475 AMD (.25micron) K6-2/266,300,333, ---350,366,380,400 K6/233,266,300 AMD IBM/Cyrix IDT Intel K5 6x86 WinChip2 P54C/P54CS 3.5V(VRE) 3.5V(VRE) 3.5V(VRE) 3.5V(VRE) AMD Intel K5 P54C/P54CS 3.4V(STD) 3.4V(STD) AMD (.35micron) K6/233 ---- AMD (.35micron) K6/166,200 ---- IBM/Cyrix 6x86MX ---- Intel P55C-MMX ---- Dual Plane VID0 VID1 VID2 VID3 2.4V(Dual) [2-3] [2-3] [1-2] [2-3] 2.2V(Dual) [2-3] [1-2] [2-3] [2-3] ------ 3.2V(Dual) 2.9V(Dual) 2.9V(Dual) 2.8V(Dual) [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [1-2] [2-3] [1-2] [1-2] [1-2] [2-3] [1-2] [1-2] [1-2] [2-3] [2-3] [1-2] [1-2] [1-2] [2-3] [2-3] [1-2] [1-2] [2-3] [2-3] [1-2] [2-3] [2-3] [2-3] [1-2] 18 ASUS P5S-VM User's Manual