Asus P7H55-M DVI User Guide - Page 37
Intel, H55 Serial ATA connectors 7-pin SATA1-6
View all Asus P7H55-M DVI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
6. Intel® H55 Serial ATA connectors (7-pin SATA1-6) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives and optical disc drives. • These connectors are set to Standard IDE mode by default. In Standard IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors. • You must install Windows® XP Service Pack 2 or later version before using Serial ATA hard disk drives. • When using hot-plug and NCQ, set the Configure SATA as item in the BIOS to [AHCI]. See section Storage Configuration for details. ASUS P7H55/USB3 1-25
ASUS P7H55/USB3
1-25
6.
Intel
®
H55 Serial ATA connectors (7-pin SATA1-6)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives
and optical disc drives.
•
These connectors are set to Standard IDE mode by default. In Standard IDE mode, you
can connect Serial ATA boot/data hard disk drives to these connectors.
•
You must install Windows
®
XP Service Pack 2 or later version before using Serial ATA
hard disk drives.
•
When using hot-plug and NCQ, set the
Configure SATA as
item in the BIOS to [AHCI].
See section
Storage Configuration
for details.