Asus P7H55-M DVI User Guide - Page 63
Security
View all Asus P7H55-M DVI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Full Screen Logo [Enabled] [Disabled] Disables the full screen logo display feature. [Enabled] Enables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. AddOn ROM Display Mode [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so. Bootup Num-Lock [On] [Off] Sets the power-on state of the NumLock to [Off]. [On] Sets the power-on state of the NumLock to [On]. Wait For 'F1' If Error [Enabled] [Disabled] Disables this function. [Enabled] The system waits for the key to be pressed when error occurs. Hit 'DEL' Message Display [Enabled] [Disabled] Disables this function. [Enabled] The system displays the message "Press DEL to run Setup" during POST. 2.7.3 Security The Security menu items allow you to change the system security settings. Select an item then press to display the configuration options. Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed. To set a Supervisor Password: 1. Select the Change Supervisor Password item and press . 2. From the password box, type a password composed of at least six letters and/or numbers, then press . 3. Confirm the password when prompted. The message Password Installed appears after you successfully set your password. To change the supervisor password, follow the same steps as in setting a user password. To clear the supervisor password, select the Change Supervisor Password then press . The message Password Uninstalled appears. If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section 1.6 Jumper for information on how to erase the RTC RAM. ASUS P7H55/USB3 2-23