Asus P8H77-M PRO User Manual - Page 81
SATA Mode Selection [IDE Mode] - driver
View all Asus P8H77-M PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
3.5.3 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. UEFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced Advanced\ SATA Configuration > Monitor SATA Configuration SATA Mode AHCI S.M.A.R.T. Status Check Enabled SATA 6G_1 (Gray) Empty Hot Plug Disabled SATA 6G_2 (Gray) Empty Hot Plug Disabled SATA 3G_3 (Blue) Empty Hot Plug Disabled SATA 3G_4 (Blue) Empty Hot Plug Disabled SATA 3G_5 (Blue) Empty Hot Plug Disabled SATA 3G_6 (Blue) Empty Boot Tool (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode. →←: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Shortcut F5: Optimized Defaults F10: Save ESC: Exit F12: Print Screen Scroll down to display the following items: Hot Plug Disabled Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc. SATA Mode Selection [IDE Mode] Allows you to set the SATA configuration. [IDE Mode] [AHCI Mode] [RAID Mode] Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. Set to [AHCI Mode] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Set to [RAID Mode] when you want to create a RAID configuration from the SATA hard disk drives. Chapter 3 3-18 Chapter 3: BIOS setup