Asus ROG MAXIMUS IX FORMULA MAXIMUS IX FORMULA Users ManualEnglish - Page 37
Internal connectors, Intel, Z270 Serial ATA 6 Gb/s connectors 7-pin SATA6G_12; SATA6G_34
View all Asus ROG MAXIMUS IX FORMULA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 1 1.1.9 Internal connectors 1. Intel® Z270 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA6G_34; SATA6G_56) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z270 chipset. • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode Selection item in the BIOS to [Intel RST Premium With Intel Optane System Acceleration (RAID)]. • Before creating a RAID set, refer to section RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI]. ASUS MAXIMUS IX FORMULA 1-21