Asus ROG MAXIMUS IX FORMULA MAXIMUS IX FORMULA Users ManualEnglish - Page 84
PCH-FW Configuration, 3.6.7 ROG Effects, 3.6.8 Onboard Devices Configuration
View all Asus ROG MAXIMUS IX FORMULA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
SATA6G_1(Gray) - SATA6G_6(Gray) SATA6G_1(Gray) - SATA6G_6(Gray) This item allows you to enable or disable the selected SATA port. Configuration options: [Disabled] [Enabled] Hot Plug These items appears only when the SATA Mode Selection is set to [AHCI] and allows you to enable or disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 3.6.6 PCH-FW Configuration This item allows you to configure the firmware TPM. 3.6.7 ROG Effects The items in this menu allow you to configure the LEDs on your motherboard and the functions for the Q-Code LED. Onboard LED This item allows you to enable all the onboard LEDs. Configuration options: [Enabled] [Disabled] Q-Code LED Function [Auto] Automatically display POST (Power-On Self-Test) code and CPU temperature on Q-Code LED. [POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED. 3.6.8 Onboard Devices Configuration The items in this menu allow you to switch between PCIe Lanes and configure onboard devices. HD Audio Controller This item allows you to use the Azalia High Definition Audio Controller Configuration options: [Disabled] [Enabled] M.2_1 Configuration: [Auto][SATA mode][PCIE mode] [Auto] Auto-detects the M.2 device mode. If a SATA device is detected, SATA6G_1 will be disabled. [SATA mode] Only supports M.2 SATA devices. Please note that SATA6G_1 port cannot be used in this mode. [PCIE mode] Only supports M.2 PCIE devices. M.2_2 PCIe Bandwidth Configuration: [X2][X4] [X2] Run at X2 mode with SATA6G_56 enabled. [X4] Run at X4 mode for higher performance with SATA6G_56 disabled. Chapter 3 3-18 Chapter 3: BIOS Setup