Asus ROG RAMPAGE V EDITION 10 RAMPAGE V EDITION 10 Users Manual English - Page 43
Internal connectors, Intel, X99 Serial ATA 6 Gb/s connectors 7-pin SATA6G_1-10
View all Asus ROG RAMPAGE V EDITION 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 1 1.1.9 Internal connectors 1. Intel® X99 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-10) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® X99 chipset. • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID array using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to the PCH Storage Configuration section for details. • Before creating a RAID array, refer to 4.1 RAID configurations section or the manual bundled in the motherboard support USB drive. ASUS RAMPAGE V EDITION 10 1-25