Asus RS100-E4 User Guide - Page 34
the rear of the optical disk drive.
UPC - 610839644315
View all Asus RS100-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3. Align the screw holes of the ODD bracket with the screw holes on the SATA drive plate then secure with four screws. 4. Connect the 80-pin IDE cable black connector to the IDE connector at the rear of the optical disk drive. 5. Connect a 4-pin ATX power connector to the power connector at the rear of the optical disk drive. 2-18 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-18
3.
Align the screw holes of the ODD
bracket with the screw holes on the
SATA drive plate then secure with
four screws.
4.
Connect the 80-pin IDE cable black
connector to the IDE connector at
the rear of the optical disk drive.
5.
Connect a 4-pin ATX power
connector to the power connector
at the rear of the optical disk drive.