Asus RS920A-E6 RS8 User Guide - Page 61
USB connector 10-1 pin USB34, A-Type USB5, SAS connectors7-pin SAS1, SAS2, SAS3, SAS4; Light Blue,
View all Asus RS920A-E6 RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2. SAS connectors(7-pin SAS1, SAS2, SAS3, SAS4; Light Blue, SAS5, SAS6, SAS7, SAS8; Black) Supported by the ASUS® PIKE Card, these connectors are for the SAS signal cables for SAS hard disk drives that allows up to 6Gb/s of data transfer rate. If you installed SAS hard disk drives, you can create a RAID 0, RAID 1, RAID 10, or RAID 5 configuration. The actual data transfer rate depends on the speed of SAS hard disks installed. 3. USB connector (10-1 pin USB34, A-Type USB5) These connectors are for USB 2.0 ports. Connect the USB module cable to connector USB34, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. ASUS RS920A-E6/RS8; RS924A-E6/RS8 4-9