Asus RT-N10 D1 users manual - Page 17
AP Mode, To set up your wireless router in AP mode
View all Asus RT-N10 D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
AP Mode In AP mode, the wireless router receives the WAN IP address from the router connected to the WAN port and provides a wireless radio signal for your network. NAT, firewall, IP sharing services are disabled. To set up your wireless router in AP mode: 1. Connect your devices. Use an Ethernet cable (wired connection) to connect your computer to the wireless router for initial configuration to avoid possible wireless setup problems. RT-N10 Modem Client Router 17
1³
AP Mode
To set up your wireless router in AP mode:
1. Connect your devices.
Use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid
possible wireless setup problems.
In AP mode, the wireless router receives the WAN IP address from
the router connected to the WAN port and provides a wireless
radio signal for your network. NAT, firewall, IP sharing services are
disabled.
Modem
Router
Client
RT-N10