Asus RT-N10 D1 users manual - Page 48
User name, Password, Enable DHCP, IP address, Domain name, Subnet Mask, DNS Server 1
View all Asus RT-N10 D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
How do you restore the system to its default settings? • Press the Reset button at the rear panel of the wireless router for more than five seconds. • Refer to the section Restoring/Saving/Uploading settings of this user manual. The following are the factory default settings: User name: Password: Enable DHCP: IP address: Domain name: Subnet Mask DNS Server 1: DNS Server 2: SSID: admin admin Yes (if WAN cable is plugged in) 192.168.1.1 (Blank) 255.255.255.0 192.168.1.1 (Blank) ASUS I cannot use 192.168.1.1 to enter the web GUI Check the router's operation mode: • In Router mode, the default IP address is 192.168.1.1 • In AP mode, use the Device Discovery utility to find the router's IP address. 48
48
User name:
admin
Password:
admin
Enable DHCP:
Yes (if WAN cable is plugged in)
IP address:
1´±.168.1.1
Domain name:
(Blank)
Subnet Mask
±²².±²².±²².0
DNS Server 1:
1´±.168.1.1
DNS Server 2:
(Blank)
SSID:
ASUS
How do you restore the system to its default settings?
•
Press the Reset button at the rear panel of the wireless
router for more than five seconds.
•
Refer to the section
Restoring/Saving/Uploading settings
of this user manual.
The following are the factory default settings:
I cannot use 192.168.1.1 to enter the web GUI
Check the router’s operation mode:
•
In Router mode, the default IP address is 1´±.168.1.1
•
In AP mode, use the Device Discovery utility to find the
router’s IP address.