Asus SABERTOOTH 990FX GEN3 R2.0 SABERTOOTH 990FX/GEN3 R2.0 User's Manual
Asus SABERTOOTH 990FX GEN3 R2.0 Manual
View all Asus SABERTOOTH 990FX GEN3 R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus SABERTOOTH 990FX GEN3 R2.0 manual content summary:
- Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 1
Motherboard SABERTOOTH 990FX/GEN3 R2.0 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 2
purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL it from http://support.asus.com/download or any problems - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 3
this guide...viii SABERTOOTH 990FX/GEN3 R2.0 specifications summary x Package contents...xiii Installation tools and components xiv Chapter 1: Product Introduction 1-1 1.1 Special features 1-1 1.1.1 Product highlights 1-1 1.1.2 "Ultimate COOL!" Thermal Solution 1-2 1.1.3 "TUF ENGINE - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 4
menu 3-36 3.8.1 ASUS EZ Flash 2 Utility 3-36 3.8.2 ASUS SPD Information 3-37 3.8.3 ASUS O.C. Profile 3-38 3.9 Exit menu 3-39 3.10 Updating BIOS 3-40 3.10.1 ASUS Update 3-40 3.10.2 ASUS EZ Flash 2 3-43 3.10.3 ASUS BIOS Updater 3-44 Chapter 4: Software support 4-1 4.1 Installing - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 5
the support DVD 4-1 4.2.2 Obtaining the software manuals 4-2 4.3 Software information 4-3 4.3.1 AI Suite II 4-3 4.3.2 ASUS TUF BIOS Flashback Wizard 4-29 4.3.10 Network iControl 4-31 4.3.11 ASUS Update 4-36 4.3.12 MyLogo2 4-37 4.3.13 Audio configurations 4-38 Chapter 5: RAID support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 6
6.2.1 6.2.2 6.2.3 6.2.4 Requirements 6-6 Installing two SLI-ready graphics cards 6-6 Installing the device drivers 6-7 Enabling the NVIDIA® SLI™ technology 6-8 Appendices A-1 Notices ...A-1 ASUS contact information A-4 vi - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 7
Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. vii - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 8
you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 9
note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 10
SABERTOOTH 990FX/GEN3 R2.0 specifications summary CPU Chipset System Bus Memory Expansion slots Multi-GPU support LAN Storage Audio AMD® Socket AM3+ for AMD® FX series CPU up to 8-core compatible with AMD® Socket AM3 for AMD® Phenom™ II / Athlon II™ / Sempron™ 100 series processors Supports AMD® - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 11
SABERTOOTH 990FX/GEN3 R2.0 specifications summary USB Exclusive TUF features Other special features 3 x ASMedia® USB 3.0 controllers - 2 x USB 3.0/2.0 ports at mid-board for front panel support - 4 x USB 3.0/2.0 ports at back panel [blue] AMD® SB950 Chipset - 12 x USB 2.0/1.1 ports (4 ports at mid - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 12
SABERTOOTH 990FX/GEN3 R2.0 specifications summary Back Panel I/O ports Internal I/O connectors BIOS features Manageability Support DVD contents Form factor 1 x PS/2 keyboard/mouse combo port 1 x Optical S/PDIF Output port 2 x eSATA 6Gb/s ports [red] 1 x USB BIOS Flashback button 1 x LAN (RJ-45) - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 13
items. User Manual ASUS SABERTOOTH 990FX/GEN3 R2.0 motherboard User manual Support DVD 4 x Serial ATA 6.0 Gb/s cables 1 x ASUS SLI™ bridge connector 1 x TUF Certification card Five-year warranty 1 x ASUS Q-Shield 1 x 2-in-1 ASUS Q-Connector kit 1 x TUF Five-year warranty manual • If any - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 14
Installation tools and components 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit AMD AM3+ CPU AMD AM3+ compatible CPU Fan DDR3 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 15
MHz Support The motherboard supports the dual-channel DDR3 memory that features data transfer rates of 1866 MHz to boost the system's performance, and to meet the higher bandwidth requirements of 3D graphics, multimedia, and Internet applications. Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-1 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 16
(Choke, Cap. & MOSFET; certified by military-standard) This motherboard provides rugged performance even in the most challenging conditions with its robust TUF chokes, solid capacitors, and MOSFETs, which are certified through a third-party, military-grade testing. TUF Chokes or Alloy Choke is made - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 17
damage the motherboard's components. The ASUS exclusive Anti- BIOS than the traditional BIOS versions. It offers you with dual selectable modes and native support for hard drives larger than 2.2 TB. ASUS UEFI BIOS includes the following new features: • F12 BIOS ASUS SABERTOOTH 990FX/GEN3 R2.0 1-3 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 18
regularly check for UEFI BIOS updates, and download the latest BIOS automatically. USB 3.0 Boost ASUS USB 3.0 Boost technology, which supports UASP (USB Attached analog format and keeps the best signal quality. ErP Ready The motherboard is European Union's Energy-related Products (ErP) ready, and ErP - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 19
the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-5 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 20
1.2.2 Motherboard layout Chapter 1 Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. 1-6 Chapter 1: Product introduction - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 21
) 15. Standby power LED 16. TPM connector (20-1 pin TPM) 17. Front panel audio connector (10-1 pin AAFP) 18. Digital audio connector (4-1 pin SPDIF_OUT) Page 1-36 1-8 1-34 1-9 1-25 1-30 1-29 1-30 1-38 1-37 1-26 1-33 1-27 1-32 1-28 1-38 1-35 1-31 Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-7 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 22
Unit (CPU) The motherboard comes with an AM3+ socket designed for AMD® FX Series CPU up to 8core, also compatible with AMD® socket AM3 for AMD® Phenom™ II/Athlon™ II/ Sempron™ 100 Series Processors. Ensure that all power cables are unplugged before installing the CPU. The AM3+ socket has a different - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 23
The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 24
version or date code (D/C) motherboard. c) For more details, refer to the Microsoft® support site at http://support.microsoft. com/kb/929605/en-us. • This motherboard does not support manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 25
SABERTOOTH 990FX/GEN3 R2.0 Motherboard Qualified Vendors Lists (QVL) DDR3 2400 MHz capability Vendors NO. - - - - Kingmax N/A Timing Voltage DIMM socket support (Optional) 1 2 4 7-10-10-28 1.65 • • • 9-10-9-28 1.65 • • • - - • • Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-11 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 26
-12- 11-30 - 9-11- 9-27 - 9-9-9- 24 K4B2G 9-9-90846D 24 Voltage DIMM socket support (Optional) 1 2 4 1.5 • • 1.5 • • • 1.5 • • 1.5 • • • 1.65 • • • 1.65 • • 1.65 • • • 1.6 • • 1.6 • • • 1.66 • • • 1.65 • • • 1.65 • • • Chapter 1 1-12 Chapter - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 27
Team T3D1288RT-20 9-9-9-24 1.5 DS Team T3D1288LT-20 9-9-9-24 1.5 DS Team T3D1288RT-20 9-9-9-24 1.6 DIMM socket support (Optional) 12 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-13 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 28
10- 9-27 H5TC2G83BFRH9A 9-11-9-27 Voltage 1.5 DIMM socket support (Optional) 1 24 • •• 1.5 •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.6 • •• 1.65 • 1.65 • •• 1.65 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 29
NO. 4GB DS - - (2x2GB) Timing 9-9-9-24 Voltage 1.6 DIMM socket support (Optional) 1 2 4 • • • DDR3 1600 MHz capability Vendors • - • • • - • • • - • • • SAMSUNG K4B2G08460 - NO • • • (continued on the next page) Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-15 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 30
24 1600 8-88-24 9-9-9-24 6-6-6-18 Heat-Sink Package 8-8-8-24 8-8-8-24 7-8-7-20 Voltage 1.5 DIMM socket support (Optional) 1 24 • •• 1.5 • •• 1.5 • •• 1.5 • •• 1.5 •• 1.5 • •• 1.5 • •• 1.65 • •• 1.5 • •• 1.65 • •• 1.65 • •• 1.65 • •• 9-9-9-24 1.65 10-10-10-27 1.5 9-9-9-24 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 31
28 9-9-9-28 9 9 9-9-9-24 9 9-9-9-27 Voltage 1.65 DIMM socket support (Optional) 12 4 •• • 1.5 •• • - •• • - •• • - •• • - •• • 1.5 •• • 1.65 •• • 1.65 •• • 1.65 •• 1.65 •• • 1.65 •• • 1.65 •• • (continued on the next page) Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-17 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 32
Patriot PXD38G1600LLK(XMP) 8GB DS (2x4GB) Chip Brand Chip NO. - - Timing - Voltage 1.35 DIMM socket support (Optional) 12 4 •• • - - 9-9-9-24 1.35 •• • - - 9 1.5 •• • - - 9 1.65 •• • - - 9 1.65 •• • - - 9 1.65 •• • - Hynix - - 1333-9-9- 1.5 9-24 H5TQ2G83CFRPBC - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 33
) TXD34096M1600HC9- 4GB D(XMP) SS/ Chip DS Brand Chip NO. Timing Voltage DIMM socket support (Optional) 12 4 DS Hynix H5TQ2G83BFRPBC - 1.5 •• • DS ELPIDA J2108BDBG-GN-F - (continued on the next page) DIMM socket support (Optional) 1 24 Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-19 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 34
9-9-9-24 - INNODISK M3UN-4GHJAC09 4GB DS Hynix H5TQ2G83CFRH9C 9-9-9-24 - KINGMAX FLFE85F-B8KL9 2GB DS KINGMAX KFB8FNLXL-BNF-15A - - (continued on the next page) DIMM socket support (Optional) 1 24 Chapter 1 1-20 Chapter 1: Product introduction - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 35
D313 - - D9PFJ - - - 9-9-9 1.65 - 9-9-9 1.65 - 9-9-9 1.65 - 9-9-9 1.65 - - 1.5 - 9-9-9- 1.5 24 - 7-7-7- 1.7 20 PM128M8D3BU-15 9 - C304627CB1AG22Fe 9 - DIMM socket support (Optional) 1 24 (continued on the next page) Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-21 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 36
provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. Chapter 1 1-22 Chapter 1: Product introduction - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 37
may cause you physical injury and damage motherboard components. Chapter 1 Slot No. 1 2 3 4 5 Slot Description PCIe 3.0 x16_1 slot (single at x16, dual at x16/x16, triple at x16/x8/x8 mode) PCIe 2.0 x16_2 slot PCIe 3.0 x16_3 slot PCI slot PCIe 3.0 x16_4 slot ASUS SABERTOOTH 990FX/GEN3 R2.0 1-23 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 38
multiple graphics cards for better thermal environment. IRQ assignments for this motherboard A B C PCIe x16_1 shared - - PCIe x16_2 shared - - PCIe x16_3 shared - - PCIe x16_4 - - - PCIe x1_1 - - - ASM eSATA - - - ASM SATA [Gray] - - - ASM USB3_12 - - - ASM 1042 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 39
BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at www.asus.com after using the MemOK! function. ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 40
also allows you to turn on or turn off your system and conveniently enter the BIOS during boot-up. Ensure to save your data before using the DirectKey button. on button to allow your system to go through POST (without entering the BIOS) when you reboot your system. • Refer to section 3.7 Boot Menu - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 41
of date, time BIOS can automatically reset parameter settings to default values. • Due to the chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 42
POST (Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component's LED stays lit up until the problem is solved. 2. Standby Power LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 43
]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. ASUS SABERTOOTH 990FX/GEN3 R2.0 1-29 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 44
/s signal cables. 3. USB 3.0 connector (20-1 pin USB3_56) This connector is for the additional USB 3.0 ports, and complies with the USB 3.0 specificaton that supports up to 480 MBps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.0 connector - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 45
S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-31 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 46
Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, brown) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately. Chapter 1 1-32 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 47
serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The COM module is purchased separately. Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2.0 1-33 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 48
place jumper caps on the fan connectors! • The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled CHA_FAN1 or CHA_FAN2 for better thermal environment. 1-34 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 49
I/O module that supports either HD Audio or motherboard's high-definition audio capability. • If you want to connect a high-definition or an AC'97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97]. Chapter 1 ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 50
system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 51
on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 52
integrity. 12. Direct Connector (2-pin DRCT) This connector is for the chassis-mounted button that supports the DirectKey function. Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the button cable that - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 53
2 2.1.1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. Chapter 2 ASUS SABERTOOTH 990FX/GEN3 R2.0 2-1 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 54
2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 2-2 Chapter 2: Getting started - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 55
3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS SABERTOOTH 990FX/GEN3 R2.0 2-3 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 56
2.1.2 CPU installation The AMD AM3+ socket is compatible with AMD AM3+ and AM3 processors. Ensure you use a CPU designed for the AM3+ socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 1 2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 57
2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 1 Chapter 2 ASUS SABERTOOTH 990FX/GEN3 R2.0 2-5 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 58
Chapter 2 2 3 4 2-6 5 Chapter 2: Getting started - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 59
2.1.4 1 DIMM installation 2 3 To remove a DIMM B A ASUS SABERTOOTH 990FX/GEN3 R2.0 2-7 Chapter 2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 60
2.1.5 1 ATX Power connection 2 OR OR Chapter 2 2-8 Chapter 2: Getting started - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 61
2.1.6 1 SATA device connection OR 2 OR Chapter 2 ASUS SABERTOOTH 990FX/GEN3 R2.0 2-9 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 62
2.1.7 Front I/O Connector To install ASUS Q-Connector 1 2 IDE_LED+ IDE_LED- IDE_LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 connector To install front panel audio connector Chapter 2 USB 2.0 To install USB 3.0 connector USB 3.0 2-10 AAFP Chapter 2: Getting started - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 63
2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 ASUS SABERTOOTH 990FX/GEN3 R2.0 2-11 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 64
seconds, and the BIOS is updated automatically. To use USB BIOS Flashback: 1. Place the bundled support DVD to the optical drive and install the USB BIOS Flashback Wizard. Follow the onscreen instructions to complete the installation. You can also download the BIOS from ASUS official website www - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 65
2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection Chapter 2 Rear panel connectors 1. BIOS Flashback button 10. USB 2.0 ports 1 and 2 11. Audio I/O ports** * and **: Refer to the tables on the next page for LAN port LEDs, and audio port definitions. ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 66
ASM1061 Storage Controller item in the BIOS setting to [Enabled] and install the ASM1061 Controller Driver from the motherboard support DVD. Refer to section 3.5.6 Onboard Devices Configuration for details. * LAN ports LED indications Activity Link LED Status Description OFF No link ORANGE - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 67
2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2 ASUS SABERTOOTH 990FX/GEN3 R2.0 2-15 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 68
Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2 2-16 Chapter 2: Getting started - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 69
you turned on the power, the system may have failed a power-on test. Check the jumper settings and connections or call your retailer for assistance. ASUS SABERTOOTH 990FX/GEN3 R2.0 2-17 Chapter 2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 70
Quick boot set to disabled No keyboard detected No memory detected No VGA detected Hardware component failure 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.5 Turning off the computer While the system is ON, press the power button - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 71
a new system component that requires further BIOS settings or update. Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-1 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 72
the CMOS and reset the motherboard to the default value. See section 1.2.6 Onboard buttons and switches for information on how to erase the RTC RAM via the Clear CMOS button. • The BIOS setup program does not support the bluetooth devices. BIOS menu screen The BIOS Setup program can be used under - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 73
CPU/motherboard temperature, CPU/5V/3.3V/12V voltage output, CPU/chassis/ power fan speed Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode UEFI BIOS Utility - EZ Mode Monday [03/25/2012] SABERTOOTH 990FX/GEN3 R2.0 BIOS - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 74
F7 hotkey. Back button Menu items Menu bar Configuration fields UEFI BIOS Utility - Advanced Mode General help Exit Main Back Ai Tweaker Advanced Asmedia USB 3.0 Controller (Front) Asmedia USB 3.0 Battery Charging Support Realtek LAN Controller Realtek PXE OPROM S3 Video Repost > Serial - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 75
menu screen is a brief description of the selected item. Use key to capture the BIOS screen and save it to the removable storage device. Configuration fields These fields show the values for it and press to display a list of options. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-5 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 76
of the basic system information, and allows you to set the system date, time, language, and security settings. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker Advanced Monitor BIOS Information BIOS Version Build Date 0211 x64 5/30/2012 CPU Information AMD(R) Phenom(TM) II X4 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 77
system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press , then press . 3. Confirm the password when prompted. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-7 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 78
and DIMM model you installed on the motherboard. Scroll down to display other BIOS items. UEFI BIOS Utility - Advanced Mode Exit Main Ai Frequency Auto HT Link Speed Auto CPU Spread Spectrum Auto PCIe Spread Spectrum Auto EPU Power Saving Mode Disabled →←: Select - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 79
Ai Overclocking Tuner to [Manual]. CPU Bus Frequency [Auto] Allows you to set the CPU and VGA frequency. Use the and keys to adjust the PCIE frequency. You can also key ] [1400MHz] [1600MHz] [1800MHz] [2000MHz] [2200MHz] [2400MHz] [2600MHz] Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-9 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 80
Sets to [Enabled] for EMI control. PCIe Spread Spectrum [Auto] [Auto] Automatic configuration. [Disabled] Enhances the PCIE overclocking ability [Enabled] Sets to [Enabled] ] [2] - [19] DRAM RAS# ACT Time [Auto] Configuration options: [Auto] [8] - [40] Chapter 3 3-10 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 81
] Configuration options: [Auto] [2] - [11] DRAM Refresh Rate [Auto] Configuration options: [Auto] [Every 7.8ms] [Every 3.9ms] DRAM COMMAND Rate [Auto] Configuration options: [Auto] [1T] [2T] Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-11 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 82
] [0.75x] [1x] [1.25x] [1.5x] Processor ODT [Auto] Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [80 ohms +/- 20%] [60 ohms +/- 20%] Chapter 3 3-12 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 83
the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment. DO NOT remove the thermal module when switching to Extreme and Manual Mode. The thermal conditions should be monitored. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 84
gets quicker transient response. Configuration options: [Auto] [Manual] DO NOT remove the thermal module when switching to Manual Mode. The thermal conditions should be monitored. VRM Spread Configuration options: [Auto] [Regular] [Medium] [Fast] [Ultra Fast] Chapter 3 3-14 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 85
Mode] Allows you to set the Offset voltage. CPU Manual Voltage [Auto] This item appears only when you set the CPU & NB Voltage item to [Manual Mode] and allows you to set a fixed CPU voltage from 0.006250V to 0.700000V with a 0.006250V interval. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-15 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 86
. SB Voltage [Auto] Allows you to set the Southbridge voltage. The values range from 1.10V to 1.80V with a 0.005V interval. VDD PCIE [Auto] Allows you to set the VDD PCIE voltage. The values range from 1.10V to 2.20V with a 0.005V interval. VDDR [Auto] Allows you to set the memory's voltage. The - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 87
Screen Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc. 3.5.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-17 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 88
1400 mV Max Speed: 3400 MHZ Intended Speed: 3400 MHZ Microcode Patch Level: 10000c6 Cache per Core -----------L1 Instruction Cache: 64 KB/2-way L1 Data Cache: 64 KB/2-way L2 Cache: 512 KB/16-way Total L3 management mode. [Disabled] Disables the feature. Chapter 3 3-18 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 89
North Bridge Configuration UEFI BIOS Utility - Advanced Mode : IOMMU Mode [Disabled] Allows you to set the IOMMU Mode that supports LINUX-based systems to convert 32bit I/O to 64-bit memory-mapped I/O. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-19 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 90
] Allows you to enable or disable the High Precision Event Timer (HPET). Configuration options: [Enabled] [Disabled] 3.5.4 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 91
the AHCI (Advabced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads external SATA port. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-21 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 92
. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Disabled] The USB devices can be used only for the BIOS setup program. [Auto] Allows the system to detect the presence of USB - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 93
Manual]. 3rd Core - 4th Core [Enabled] Allows you to enable or disable the core's activation. Configuration options: [Enabled] [Disabled] 3.5.7 Onboard Devices Configuration Scroll down to view the other BIOS items. UEFI BIOS Battery Charging Support Realtek ASUS SABERTOOTH 990FX/GEN3 R2.0 3-23 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 94
3.0 Battery Charging Support [Disabled] [Enabled] Enables Asmedia USB 3.0 fast battery charging support for USB 3.0 only functions if there is a serial port (COM1) connector on the motherboard. Serial Port [Enabled] Allows you to enable or disable the serial Chapter 3 3-24 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 95
audio depending on the audio standard that the front panel audio module supports. [AC97] Sets the front panel audio connector (AAFP) mode to legacy By Ring Disabled Power On By RTC Disabled Boot Tool Allow BIOS to switch off some power at S5 to get the ASUS SABERTOOTH 990FX/GEN3 R2.0 3-25 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 96
the items RTC Alarm Date (Days) and Hour/ Minute/Second will become user-configurable with set values. 3.5.9 Network Stack UEFI BIOS Utility - Advanced Mode only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] Allows you to enable or disable the Ipv4/Ipv6 PXE boot - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 97
BIOS items. UEFI BIOS motherboard, the field shows N/A. Select [Ignore] if you do not wish to display the detected speed. CPU Q-Fan Control [Enabled] [Disabled] Disables the CPU Q-Fan control feature. [Enabled] Enables the CPU Q-Fan control feature. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 98
quiet CPU fan operation. [Turbo] Sets to [Turbo] to achieve maximum CPU fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four items appear only when you set CPU RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Chapter 3 3-28 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 99
fan operation. [Turbo] Sets to [Turbo] to achieve maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four items appear only when you fan will operate at the minimum duty cycle. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-29 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 100
Network Stack Driver Support Next Boot after AC Power Loss DirectKey Enabled Partial In... Disabled Disabled Normal Boot [Go to BIOS...] Full Screen Logo Enabled POST Delay Time 3 sec Bootup NumLock State On Wait for 'F1' If Error Enabled Option ROM Messages Force BIOS Setup Mode - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 101
system, PS/2 devices will not be available and BIOS setup program will not be accessible via PS/2 Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver ASUS SABERTOOTH 990FX/GEN3 R2.0 3-31 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 102
fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. Disable the CSM to fully support the Windows® Security Update and first] [UEFI driver first] [Ignore] Boot from PCIe/PCI Expansion Devices [Legacy OpROM first] Allows you to select the type of PCIe/PCI expansion devices - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 103
only supports Windows® drivers from running during boot time. [Standard] Allows the system to automatically load the Secure Boot keys from the BIOS database. [Custom] Allows you to customize the Secure Boot settings and manually load its keys from the BIOS ASUS SABERTOOTH 990FX/GEN3 R2.0 3-33 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 104
-based authenticated variable. db Management The db (Authorized Signature database) lists the signers or images of UEFI applications, operating system loaders, and UEFI drivers that you can load on the single computer. Load db from File Allows you to load the downloaded db from a USB storage device - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 105
dbx file from your system. Configuration options: [Yes] [No] The dbx file must be formatted as a UEFI variable structure with time-based authenticated variable. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-35 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 106
to display the submenu. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker > ASUS EZ Flash 2 Utility > ASUS SPD Information > ASUS O.C. Profile Advanced Monitor Boot Tool Be used to update BIOS 3.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2. When you press - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 107
you to view the DRAM SPD information. UEFI BIOS Utility - Advanced Mode Main Back Ai Tweaker Tool\ ASUS SPD Information > Advanced Monitor DIMM Slot # Manufacturer : Print Screen Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-37 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 108
multiple BIOS settings. UEFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Tool\ ASUS O.C. BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 109
and exit. ASUS EZ Mode This option allows you to enter the EZ Mode screen. Launch EFI Shell from filesystem device This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available filesystem devices. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-39 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 110
of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result in the system's failure to boot. Carefully follow the instructions of this chapter to update your BIOS if necessary. Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. The - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 111
the ASUS FTP site nearest you to avoid network traffic. If you want to enable the BIOS downgrade and auto backup functions, tick Enable BIOS downgrade and Automatically backup my current BIOS. 3. Select the BIOS version that you want to download. Click Next. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 112
No to continue. 4. Follow the onscreen instructions to complete the update process. • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 113
the latest BIOS, and then press . 5. Press to switch to the Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done. ASUS SABERTOOTH 990FX/GEN3 R2.0 3-43 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 114
screen displays may not be same as shown. Before updating BIOS 1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. 2. Download the latest BIOS file and BIOS Updater from the ASUS website at http://support.asus.com and save them on the USB flash drive - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 115
drive) to Drive D (USB flash drive). Welcome to FreeDOS (http://www.freedos.org)! C:\>d: D:\> Updating the BIOS file To update the BIOS file using BIOS Updater: 1. At the FreeDOS prompt, type bupdater /pc /g and press . D:\>bupdater /pc /g Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-45 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 116
screen appears as below. ASUSTek BIOS Updater for DOS V1.30 [2012/12/22] FLASH TYPE: MX1C 25L1065A Current ROM BOARD: SABERTOOTH 990FX/GEN3 R2.0 VER: 0204 DATE: 09/15/2012 Update ROM BOARD: UNKNOWN VER: UNKNOWN DATE: UNKNOWN PATH: A:\ A: ST990R20.CAP 2097152 2012-05-30 17:30:48 Note [Enter - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 117
and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3 of your motherboard user manual for details. • Ensure to connect all SATA hard disk drives after updating the BIOS file if you have disconnected them. Chapter 3 ASUS SABERTOOTH 990FX/GEN3 R2.0 3-47 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 118
Chapter 3 3-48 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 119
an icon to display DVD/ motherboard information Click an item to install Chapter 4 If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click ASSETUP.EXE to run the DVD. ASUS SABERTOOTH 990FX/GEN3 R2.0 4-1 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 120
the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click Manual tab. Click ASUS Motherboard Utility Guide from - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 121
the system, to update the motherboard BIOS, to display the manual are for reference only. The actual screenshots vary with models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 122
4.3.2 ASUS TUF Thermal Radar TUF Thermal Radar monitors the Radar on the AI Suite II main menu bar. The software screen captures in this manual are for reference only. Using the Thermal Radar main screen To use the Thermal Radar: voltage information Chapter 4 4-4 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 123
Configuring system fan settings TUF Thermal Radar's preset fan profiles automatically adjusts the fan speeds based on the ambient temperature and the Profile Name dropdown list and click Apply. Click the CPU or CHA icon to configure the system fans. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-5 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 124
components to monitor. 3. Adjust the slider of each selected component for a 100% combination and click Apply. For example, you assign 60% to motherboard, 20% to VCORE, and 20% to VCCSA and click Apply, Thermal Radar calculates the overall temperature of the monitored components to automatically set - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 125
select the CHA_FAN4 setting Adjust the slider to set RPM percentage of the User fan setting Click to save and apply the changes made Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-7 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 126
you to remotely control and access your computer using your mobile device, and easily transfer files between your computer and mobile device. • Remote GO! is supported only on Windows® 7. • All devices using the Remote GO! functions must be in the same network. Using Remote GO! To launch Remote GO - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 127
iTunes store. For Android devices, download the Wi-Fi GO! Remote from Google Play Store or from ASUS support DVD. Launching Wi-Fi GO! Remote 1. Turn on your mobile device's wireless connection. Ensure that you want to connect to your mobile device. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-9 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 128
-Fi GO! Remote's user interface shown above is for reference only and may vary with the mobile device's operating system. Below are the supported screen resolution of your mobile devices: Screen type Low Density Medium Density High Density (120, ldpi) (160, mdpi) (240, hdpi) Small creen Normal - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 129
under Windows® 7 support the DLNA Media Hub function. • Keep the Windows Media Player open. Ensure that your media file formats supported on Windows Media Player and DLNA playback devices. 3. Click any of the tabs to select your preferred media file type. ASUS SABERTOOTH 990FX/GEN3 R2.0 4-11 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 130
Save. To add as a new playlist, key in your profile name and click Save. 5. To delete playlist, select the profile and click . 4-12 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 131
and click Save. To add as a new playlist, key in your profile name and click Save. 5. To delete playlist, select the profile and click . Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-13 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 132
. To add as a new playlist, key in your profile name and click Save. 5. To delete playlist, select the profile and click . Chapter 4 4-14 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 133
remotely operate your computer in real-time from your mobile device. Using the Remote Desktop 1. From the main screen, click Remote Desktop. 2. Click Setting. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-15 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 134
4 The Wi-Fi GO! Remote's user interface shown above is for reference only and may vary with the mobile device's operating system. 4-16 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 135
Enable to receive files from PC. 3. Tap Enter to send files to PC. Destination path for the files transferred from desktop to mobile device Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-17 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 136
Wi-Fi GO! Remote, the application prompts you to key in the computer's password. • Your password must contain 6-12 letters or numbers. 4-18 Chapter 4: Software support Chapter 4 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 137
main menu bar.. Refer to the software manual in the support DVD or visit the ASUS website at www.asus. com for detailed software configuration. TurboV all changes made in TurboV will not be saved to BIOS settings and will not be kept on the next system boot. ASUS SABERTOOTH 990FX/GEN3 R2.0 4-19 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 138
values Current values Click to restore all startup settings Voltage Adjustment bars Undoes all the changes Applies all the changes immediately Chapter 4 4-20 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 139
the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function in TurboV. Refer to the BIOS chapter of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-21 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 140
4.3.5 DIGI+ Power Control ASUS DIGI+ Power Control allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability. It also Set to a higher value for system performance, or to a lower value for better thermal solution. Chapter 4 4-22 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 141
vary depending on your CPU specification. • DO NOT remove the thermal module. The thermal conditions should be monitored. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS SABERTOOTH 990FX/GEN3 R2.0 4-23 Chapter 4 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 142
for system stability or to increase the overclocking range. 3 DRAM Power Phase Control Set Manual Adjustment to faster phase response to increase system performance or to slower phase response to module. The thermal conditions should be monitored. Chapter 4 4-24 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 143
for the status you want to monitor. Colored lines will automatically appear on the diagram to indicate the immediate changes in the system status. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-25 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 144
Click Start Recording to start measuring and recording each sensor. 3. To stop recording, click Recording again. 4. To track the recorded contents, set Type/ Date/ Select display items to display the history details. Click Monitor > Sensor on the AI Suite II main menu bar and the system status will - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 145
specifications of your USB device. • To ensure normal charging function, disconnect and reconnect your USB device every time you enable or disable Ai Charger+. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-27 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 146
switch the USB 3.0 mode back to Normal mode at any time. Chapter 4 • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. • Use the USB 3.0 devices for high performance. The data transfer speed varies with USB devices - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 147
updated BIOS Before you start downloading, ensure that you have installed the USB storage device to your computer's USB port. 1. Click Check for New BIOS Update to check for the latest BIOS version. Wait for the system to check the latest BIOS firmware. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 148
2. From the Save to dropdown list, select the USB storage device that you want to save the BIOS file to, then click Download. 3. When the download process is completed, click OK to exit. Chapter 4 4-30 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 149
main menu bar. • Ensure to install the LAN drivers before using this function. • Network iControl is only supported under Windows 7 and can only support the onboard LAN. Using EZ Start EZ Start allows may also apply your personal profile in EZ Start. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-31 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 150
settings: 1. Right-click in the taskbar, and select Open Network and Sharing Center. 2. Right-click the PPPoE Connection, and select Properties. Chapter 4 4-32 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 151
connection settings. • You only need to configure the PPPoE connection settings once. • Obtain the necessary information about your PPPoE connection from your network provider. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-33 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 152
to select Connection Name Tick to set the auto PPPoE connection Click to apply settings Click ON to improve network performance Chapter 4 4-34 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 153
Pre-schedule your network priorities to avoid network congestions Select a program, and click to edit your network profile Information pane of currently running programs Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-35 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 154
you to manage, save, and update the motherboard BIOS in Windows® environment. Launching ASUS Update To launch ASUS Update, click Update> ASUS Update on the AI Suite II main menu bar. Using ASUS Update Select any of these options to update the BIOS: • Update BIOS from Internet Allows you to download - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 155
logo of a downloaded BIOS file and update (or do not update) this BIOS to the motherboard 1. From the BIOS file field, click Browse to locate the BIOS file. 2. From the Picture File field, click Browse the image for your boot logo, then click Next. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-37 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 156
BIOS to use this feature. 4.3.13 Audio configurations The Realtek® audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer. The software provides Jack-Sensing function, S/PDIF Out support Driver from the support DVD that came with the motherboard - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 157
Exit button Minimize button Information button • Refer to the software manual in the support DVD or visit the ASUS website at www. asus.com for detailed software configuration. • To play Blu-Ray disc, make sure to use an HDCP compliant monitor. Chapter 4 ASUS SABERTOOTH 990FX/GEN3 R2.0 4-39 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 158
Chapter 4 4-40 Chapter 4: Software support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 159
motherboard supports the following RAID configurations: RAID 0, RAID 1, RAID 10 and RAID 5. • You must install Windows® XP Service create a RAID driver disk and load the RAID driver during OS installation. Refer to section 5.2 Creating a RAID driver disk for ASUS SABERTOOTH 990FX/GEN3 R2.0 5-1 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 160
5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For [RAID Mode]. 4. Save your changes, and then exit the BIOS Setup. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup Due to chipset limitation, when SATA ports are set to - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 161
. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. To create a RAID volume using more than four hard disk drives, ensure that the SATA connectors 5/6 are set to [RAID] mode. Chapter 5 ASUS SABERTOOTH 990FX/GEN3 R2.0 5-3 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 162
Creating a RAID volume To create a RAID volume: 1. In the Main Menu, press to enter the LD View / LD Define Menu function. 2. Press + , and the following screen appears. Option ROM Utility (c) 2009 Advanced Micro Devices, Inc. [ LD Define Menu ] LD No LD Name RAID Mode Drv LD 1 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 163
messages: Press Ctrl-Y to delte the data in the disk! or press any other key to abort... Press + to delete the RAID volume. Chapter 5 ASUS SABERTOOTH 990FX/GEN3 R2.0 5-5 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 164
Displaying a RAID set information To display a RAID set information: 1. In the Main Menu, press to enter the LD View / LD Define Menu function. 2. Select a RAID item and press to display its information. Option ROM Utility (c) 2009 Advanced Micro Devices, Inc. [ View LD Defination Menu - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 165
Intel AHCI/RAID Driver Disk to create a RAID driver disk. 5. Select USB floppy disk drive as the destination disk. 6. Follow the succeeding screen instructions to complete the process. Write-protect the floppy disk to avoid a computer virus infection. Chapter 5 ASUS SABERTOOTH 990FX/GEN3 R2.0 5-7 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 166
the corresponding OS version. Click OK. 4. Follow the succeeding screen instructions to complete the installation. Before loading the RAID driver from a USB flash drive, you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive. Chapter 5 5-8 Chapter - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 167
tab. The Vendor ID (VID) and Product ID (PID) are displayed. Chapter 5 5. Browse the contents of the RAID driver disk to locate the file txtsetup.oem. 6. Double-click the file. A window appears, allowing you to select the program for opening the oem file. ASUS SABERTOOTH 990FX/GEN3 R2.0 5-9 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 168
7. Use Notepad to open the file. 8. Find the [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] and [HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem file. 9. Type the following line to the bottom of the two sections: id = "USB\VID_xxxx&PID_xxxx", "usbstor" [ - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 169
6: Multiple GPU support Multiple GPU support 6 6.1 AMD® CrossFireX™ technology The motherboard supports the AMD® CrossFireX graphics card driver/s. 4. For Windows XP, select Add/Remove. For Windows 7, select Uninstall. 5. Turn off your computer. Chapter 6 ASUS SABERTOOTH 990FX/GEN3 R2.0 6-1 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 170
the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi- bridge (bundled with graphics cards) Goldfingers Chapter 6 6-2 Chapter 6: Multiple GPU support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 171
5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. Connect a VGA or a DVI cable to the graphics card. Chapter 6 ASUS SABERTOOTH 990FX/GEN3 R2.0 6-3 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 172
the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the AMD® CrossFireX™ technology. Download the latest driver from the AMD website (www.amd.com). 6.1.5 Enabling the AMD® CrossFireX™ technology After - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 173
Performance > AMD CrossFireXTM. 2. Select Enable CrossFireXTM. 3. Select a GPU combination from the drop-down list. 4. Click Apply to save and activate the GPU settings made. 2 1 3 4 Chapter 6 ASUS SABERTOOTH 990FX/GEN3 R2.0 6-5 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 174
® certified. • Ensure that your graphics card driver supports the NVIDIA SLI technology. Download the latest driver from the NVIDIA website at www.nvidia.com the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 175
to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the NVIDIA® SLI™ technology. Download the latest driver from the NVIDIA website (www.nvidia.com). Chapter 6 ASUS SABERTOOTH 990FX/GEN3 R2.0 6-7 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 176
6.2.4 Enabling the NVIDIA® SLI™ technology After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA® Control Panel under the Windows® 7 operating B2. From the Screen Resolution window, click Advanced settings. Chapter 6 6-8 Chapter 6: Multiple GPU support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 177
, PhysX. In the Quad-SLI enabled, click Maximize 3D Performance SLI to set the display for viewing SLI rendered content. When done, click Apply. Chapter 6 ASUS SABERTOOTH 990FX/GEN3 R2.0 6-9 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 178
Chapter 6 6-10 Chapter 6: Multiple GPU support - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 179
radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that void the user's authority to operate this equipment. Appendices ASUS SABERTOOTH 990FX/GEN3 R2.0 A-1 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 180
appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Cet appareil est conforme aux normes CNR exemptes de licence d'Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 181
ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback asus.com/english/Takeback.htm for detailed recycling information in different regions. Appendices ASUS SABERTOOTH 990FX/GEN3 R2.0 - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 182
CA 94539, USA Telephone +1-812-282-3777 Fax +1-510-608-4555 Web site usa.asus.com Technical Support Telephone Support fax Online support +1-812-282-2787 +1-812-284-0883 support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 183
TAIWAN R.O.C. TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Motherboard Model name : SABERTOOTH 990FX/GEN3 R2.0 conform with the (EC conformity marking) Position : CEO Name : Jerry Shen Declaration Date: Nov. 19, 2012 Year to begin affixing CE marking:2012 Signature - Asus SABERTOOTH 990FX GEN3 R2.0 | SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 184
Appendices A-6 Appendices
Motherboard
SABERTOOTH
990FX/GEN3
R2.0