Asus SABERTOOTH 990FX GEN3 R2.0 SABERTOOTH 990FX/GEN3 R2.0 User's Manual - Page 43
Internal connectors, Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_1-6 [brown]
View all Asus SABERTOOTH 990FX GEN3 R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
1.2.9 Internal connectors 1. AMD® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [brown]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration through the onboard AMD® SB950 chipset. Chapter 1 • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.5.4 SATA Configuration for details. • Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD. • When creating a RAID set, set the SATA_5-6 connectors to [AHCI Mode] or [IDE Mode] to ensure that the system recognizes your ODD device. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. ASUS SABERTOOTH 990FX/GEN3 R2.0 1-29