Asus SABERTOOTH X79 User Manual - Page 90
Assistant/PCH Q-Fan Control [Enabled], Assistant/PCH Fan Speed Low Limit [600 RPM]
View all Asus SABERTOOTH X79 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
The following four items appear only when you set Chassis 1/2/3/4 Fan Profile to [Manual]. Chassis 1/2/3/4 Upper Temperature [70] Use the and keys to adjust the upper limit of the chassis temperature. The values range from 40ºC to 90ºC. Chassis 1/2/3/4 Fan Max. Duty Cycle(%) [100] Use the and keys to adjust the maximum chassis fan duty cycle. The values range from 60% to 100%. The minimum value can not lower than the setting of Min duty cycle. When the chassis temperature reaches 95 degree, fan will run up to full speed. Chassis 1/2/3/4 Lower Temperature [40] Displays the lower limit of the chassis temperature. Chassis 1/2/3/4 Fan Min. Duty Cycle(%) [60] Use the and keys to adjust the minimum chassis fan duty cycle. The values range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the minimum duty cycle. Assistant/PCH Q-Fan Control [Enabled] [Disabled] Disables the Assistant / PCH Q-Fan control feature. [Enabled] Enables the Aassistant / PCH Q-Fan control feature. Assistant/PCH Fan Speed Low Limit [600 RPM] This item appears only when you enable the Assistant/PCH Q-Fan Control feature and allows you to disable or set the Assistant/PCH fan warning speed. Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Assistant/PCH Fan Profile [Standard] This item appears only when you enable the Assistant/PCH Q-Fan Control feature and allows you to set the appropriate performance level of the assistant/PCH fan. [Standard] Sets to [Standard] to make the assistant/PCH fan automatically adjust depending on the assistant/PCH temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet assistant/PCH fan operation. [Turbo] Sets to [Turbo] to achieve maximum assistant/PCH fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four items appear only when you set Assistant/PCH Fan Profile to [Manual]. Assistant/PCH Upper Temperature [70] Use the and keys to adjust the upper limit of the assistant/PCH temperature. The values range from 40ºC to 90ºC. Assistant/PCH Fan Max. Duty Cycle(%) [100] Use the and keys to adjust the maximum assistant/PCH fan duty cycle. The values range from 60% to 100%. The minimum value can not lower than the setting of Min duty cycle. When the assistant/PCH temperature reaches 95 degree, fan will run up to full speed. Chapter 3 3-28 Chapter 3: BIOS setup