Asus TX97-LE TX97-LE User Manual - Page 26
Parallel Printer Connector PRINTER, 26-1 pin block
View all Asus TX97-LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
III. INSTALLATION (Connectors) III. INSTALLATION 3. Parallel Printer Connector (PRINTER, 26-1 pin block) This connector supports the included parallel port ribbon cable with mounting bracket. Connect the ribbon cable to this connection and mount the bracket to the case on an open slot. A PS/2 mouse connector is included for the USB/IR/ Mouse onboard connector if the optional USB/MIR connector is not used. You can make available the parallel port and choose the IRQ through the Onboard Parallel Port in Chipset Features of the BIOS SOFTWARE. (Pin 26 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 26 plugged). NOTE: Serial printers must be connected to the serial port. Connect the Red R stripe to Pin 1 Pin 1 TIP: You may also remove the bracket connectors and mount them directly to the case to save expansion slot space. Parallel (Printer) Connector 4. Serial Port Connectors (COM1/COM2, two 10-1 pin blocks) These connectors support the provided serial port ribbon cables with mounting bracket. Connect the ribbon cables to these connectors and mount the bracket to the case on an open slot. You can make available the parallel port and choose the IRQ through the Onboard Serial Port in Chipset Features of the BIOS SOFTWARE. (Pin 10 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 10 plugged). COM 1 For these connectors to be available, you R must connect the included Serial cable set from COM1 (using the 9-Pin male) & COM2 Pin 1 (using the 25-Pin male) to a free expansion COM 2 slot opening. Pin 1 TIP: You may also remove the bracket connectors and mount them directly to the case to save expansion slot space. Onboard Serial Port Connectors 26 ASUS TX97-LE User's Manual