Asus TX97-LE TX97-LE User Manual - Page 27

Chassis Open Alarm Lead CHASSIS, 4-1 pins

Get Asus TX97-LE PDF manuals and user guides View all Asus TX97-LE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Rotation +12 Volt Ground III. INSTALLATION (Connectors) Rotation +12 Volt Ground III. INSTALLATION 5. CPU Cooling Fan Connectors (FAN, 3 pins) This connector supports a 3-pin CPU cooling fan of 500mAMP (6WATT) or less with a minimum of 3,500RPM. Depending on the fan manufacturer, the wiring and plug may be different. The red wire should be Positive, the black should be Ground, and the yellow wire should be Rotation signal. WARNING! The CPU and/or motherboard will overheat if there is no airflow across the CPU. Damage may occur to the motherboard and/or the CPU fan if these pins are incorrectly used. These are not jumpers, do not place jumper caps over these pins. Power Supply Fan R Chassis Fan Power CPU Fan Power 12Volt Chassis, CPU, Power Supply Fan Power 6. Chassis Open Alarm Lead (CHASSIS, 4-1 pins) This lead is for an open chassis monitor. A high level signal to the CHASSIS lead will indicate to the system that the chassis has been opened. R Chassis open alarm lead +5Volt (Power Supply Stand By) Chassis Signal Ground ASUS TX97-LE User's Manual 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
ASUS TX97-LE User’s Manual
27
III. INSTALLATION
(Connectors)
III.
INSTALLATION
5.
CPU Cooling Fan Connectors (FAN, 3 pins)
This connector supports a 3-pin CPU cooling fan of 500mAMP (6WATT) or
less with a minimum of 3,500RPM.
Depending on the fan manufacturer, the
wiring and plug may be different.
The red wire should be
Positive
, the black
should be
Ground
, and the yellow wire should be
Rotation
signal.
WARNING!
The CPU and/or motherboard will overheat if there is no airflow
across the CPU.
Damage may occur to the motherboard and/or the CPU fan if
these pins are incorrectly used.
These are not jumpers, do not place jumper
caps over these pins.
12Volt Chassis, CPU, Power Supply Fan Power
Power Supply Fan
Chassis Fan Power
CPU Fan Power
Ground
Rotation
+12 Volt
Ground
Rotation
+12 Volt
6.
Chassis Open Alarm Lead (CHASSIS, 4-1 pins)
This lead is for an open chassis monitor.
A high level signal to the CHASSIS
lead will indicate to the system that the chassis has been opened.
Chassis open alarm lead
+5Volt (Power Supply Stand By)
Ground
Chassis Signal