Asus TX97-N TX97-N User Manual - Page 13
Jumper Settings
View all Asus TX97-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
III. INSTALLATION Jumper Settings 1. Real Time Clock (RTC) RAM (RTCLR) The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer and remove the AC power , (2) Move this jumper to "Clear Data," (3) Move the jumper back to "Operation," (4) Turn on your computer, (5) Hold down during bootup and enter BIOS setup to re-enter user preferences. Battery Test Jumper (RTCLR) You can test the battery's current by removing this jumper and attaching a current meter to the "Operation" pins. WARNING! You must unplug the power cord to your power supply to ensure that there is no power to your motherboard. The CMOS RAM containing BIOS setup information may be cleared by this action. You should enter BIOS to "Load Setup Defaults" and re-enter any user information after removing and reapplying this jumper. RTC RAM RTCLR Operation [2-3] (Default) Clear Data [1-2] (momentarily) Real Time Clock (RTC) RAM RTCLR 3 2 Battery Test 1 Operation (Default) RTCLR 3 2 1 Clear Data R III. INSTALLATION (Jumpers) ASUS TX97-N User's Manual 13