Asus TX97 User Manual - Page 20

DIMM Memory Installation Procedures

Get Asus TX97 PDF manuals and user guides View all Asus TX97 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

III. INSTALLATION DIMM Memory Installation Procedures: Insert the module as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation as shown. DRAM SIMM modules have the same pin contact on both sides. SDRAM DIMM modules have different pint contact on each side and therefore have a higher pin density. 20 Pins 60 Pins 88 Pins 168 Pin DIMM Memory Sockets Lock The Dual Inline Memory Module (DIMM) memory module must be a 3.3Volt Unbuffered Synchronous DRAM (SDRAM). You can identify the type of DIMM module by the illustration below: 168-Pin DIMM Notch Key Definitions (3.3V) R III. INSTALLATION (System Memory) DRAM Key Position RFU Unbuffered Buffered Voltage 5.0V The notch on the DIMM module will shift between left, center, or right to identify the type and also to prevent the wrong type to be inserted into the DIMM slot on the motherboard. You must ask your retailer for the specifications before purchasing. 4 clock signals are supported on this motherboard. 20 ASUS TX97 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
20
ASUS TX97 User’s Manual
III. INSTALLATION
DIMM Memory Installation Procedures:
Insert the module as shown.
Because the number of pins are different on either side
of the breaks, the module will only fit in the orientation as shown.
DRAM SIMM
modules have the same pin contact on both sides.
SDRAM DIMM modules have
different pint contact on each side and therefore have a higher pin density.
168 Pin DIMM Memory Sockets
Lock
88 Pins
60 Pins
20 Pins
The Dual Inline Memory Module (DIMM) memory module must be a 3.3Volt Un-
buffered Synchronous DRAM (SDRAM).
You can identify the type of DIMM module
by the illustration below:
168-Pin DIMM Notch Key Definitions (3.3V)
DRAM Key Position
Voltage
Unbuffered
RFU
Buffered
5.0V
The notch on the DIMM module will shift between left, center, or right to identify
the type and also to prevent the wrong type to be inserted into the DIMM slot on the
motherboard.
You must ask your retailer for the specifications before purchasing.
4
clock signals are supported on this motherboard.
(System Memory)
III.
INSTALLATION