Asus TX97 User Manual - Page 28
ASUS TX97 User's Manual, AT Power Connector, pin block, AT Power Connector with ATX Power Supply
View all Asus TX97 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
R R III. INSTALLATION (Connectors) III. INSTALLATION 9. AT Power Connector (12-pin block) This connector connects to a standard 5 Volt power supply. To connect the leads from the power supply, ensure first that the power supply is not plugged. Most power supplies provide two plugs (P8 and P9), each containing six wires, two of which are black. Orient the connectors so that the black wires are together. PG +12V GND +5V ORG RED YLW BLU BLK BLK BLK BLK WHT RED RED RED P8 P9 +5V -12V -5V Power Connector Power Connector on Motherboard Power Plugs from Power Supply Using a slight angle, align the plastic guide pins on the lead to their receptacles on the connector. Once aligned, press the lead onto the connector until the lead locks into place. AT Power Connector with ATX Power Supply For ATX Power Switch, Soft Power Switch, and remote power on functions, an ATX power supply and ATX to AT power connector adapter are required. The ATX to AT power connector adapter will allow an ATX power supply to be used on this AT motherboard with additional ATX signals connected to this lead. The ATX power switch button will be connected to the System Panel Connectors. +5V Standby (Vlt) Ground (Blk) Power On (Grn) PWRATX To ATX Power Supply For ATX soft power features on this AT motherboard, you need an ATX power supply, P9 P8 optional ATX to AT power connector adapter, and a To AT Power Connector To PWRATX momentary switch button. ATX Power Switch Lead Optional ATX to AT Power Connector Adapter 28 ASUS TX97 User's Manual