Asus Vintage-PH1 Vintage-PH1 User''s Manual for English E1943 - Page 62
intrusion event.
View all Asus Vintage-PH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
10. Chassis intrusion connector (4-1 pin CHASSIS1) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS1 +5VSB_MB Chassis Signal GND ® Chassis intrusion connector (Default) 4-12 Chapter 4: Motherboard info
4-12
4-12
4-12
4-12
4-12
Chapter 4: Motherboard info
Chapter 4: Motherboard info
Chapter 4: Motherboard info
Chapter 4: Motherboard info
Chapter 4: Motherboard info
10.
10.
10.
10.
10. Chassis intrusion connector (4-1 pin CHASSIS1)
Chassis intrusion connector (4-1 pin CHASSIS1)
Chassis intrusion connector (4-1 pin CHASSIS1)
Chassis intrusion connector (4-1 pin CHASSIS1)
Chassis intrusion connector (4-1 pin CHASSIS1)
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
Chassis intrusion connector
CHASSIS1
(Default)
+5VSB_MB
Chassis Signal
GND