Asus WS C246 PRO Users Manual English - Page 45
Wait until the light goes out, indicating that the BIOS updating process is completed.
View all Asus WS C246 PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Refer to section 1.1.8 Onboard LEDs for more information of the Flashback LED. 5. Wait until the light goes out, indicating that the BIOS updating process is completed. For more BIOS update utilities in BIOS setup, refer to the section 3.10 Updating BIOS in Chapter 3. • Do not unplug portable disk, power system, or short the CLRTC jumper while BIOS update is ongoing, otherwise update will be interrupted. In case of interruption, please press and hold the BIOS_FLBK button for 3 seconds again to restart the process. • If the light flashes for five seconds and turns into a solid light, this means that the BIOS Flashback is not operating properly. Please check the following when this happens: - The USB drive should only contain a single partition. - The USB drive should be formatted to a FAT32, FAT16, or NTFS filesystem. - The BIOS filename should be correctly named, and in the root folder of the USB drive. - If the problem persists, the USB drive may not be compatible, please try another USB drive of a different brand/model. Then retry the flashback by pressing the BIOS flashback button for three seconds until the Flashback LED starts to blink. Chapter 2 ASUS WS C246 PRO 2-13