Asus WS C246 PRO Users Manual English - Page 67
Network Stack Configuration, 3.6.11 NVMe Configuration, 3.6.12 HDD/SSD SMART Information
View all Asus WS C246 PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3.6.10 Network Stack Configuration The items in this menu allow you to configure Ipv4 / Ipv6 PXE support. 3.6.11 NVMe Configuration You may view the NVMe controller and Drive information if a NVMe device is connected. 3.6.12 HDD/SSD SMART Information The items in this menu display the SMART information of the connected devices. NVM Express devices do not support SMART information. 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Qfan Configuration Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. 3.8 Boot menu The Boot menu items allow you to change the system boot options. Boot Configuration Setup Mode [Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST. [EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST. CSM (Compatibility Support Module) This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility. Launch CSM [Enabled] [Disabled] For better compatibility, enable the CSM to fully support the nonUEFI driver add-on devices or the Windows® UEFI mode. Disable the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. Chapter 3 ASUS WS C246 PRO 3-17