Asus WS Z390 PRO User Manual - Page 38
RGB header 4-pin RGB_HEADER1, This connector is for RGB LED strips.
View all Asus WS Z390 PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 1 14. RGB header (4-pin RGB_HEADER1) This connector is for RGB LED strips. The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 2A (12V), and no longer than 2 m. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. • If your LED strip does not light up, check if the RGB LED extension cable and the RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard. • The LED strip will only light up under the operating system. • The LED strip is purchased separately. 1-24 Chapter 1: Product Introduction