Asus WS Z390 PRO User Manual - Page 76
APM Configuration, 3.6.10 PCI Subsystem Settings, 3.6.12 Network Stack Configuration
View all Asus WS Z390 PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
3.6.9 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] 3.6.10 PCI Subsystem Settings SR-IOV Support [Disabled] This option enables or disables Single Root IO Virtualization Support if the system has SRIOV capable PCIe devices. Configuration options: [Disabled] [Enabled] 3.6.11 USB Configuration The items in this menu allow you to change the USB-related features. The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None. USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.1.2 Motherboard layout for the location of the USB ports. 3.6.12 Network Stack Configuration The items in this menu allow you to configure Ipv4 / Ipv6 PXE support. 3.6.13 NVMe Configuration This menu displays the NVMe controller and Drive information of the connected devices. 3.6.14 HDD/SSD SMART Information The items in this menu display the SMART information of the connected devices. NVM Express devices do not support SMART information. Chapter 3 3-20 Chapter 3: BIOS Setup