Asus X99-A/USB 3.1TRANSFER EXPRESS User Guide - Page 120
APM Configuration, Serial Port Configuration, ErP Ready [Disabled]
View all Asus X99-A/USB 3.1TRANSFER EXPRESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Serial Port Configuration The items in this menu allows you to set the parameters of the serial port. This items in this menu works only if a serial port connector is installed on the motherboard. Serial Port [On] This item allows you to enable/disable the serial port. Configuration options: [On] [Off] Change Settings [Auto] This item allows you to select an optimal setting for Super IO device. Configuration options: [Auto] [IO=3F8h; IRQ=4;] [IO=3F8h; IRQ=3, 4, 5, 6, 7, 8, 9, 10, 11, 12;] [IO=2F8h; IRQ=3, 4, 5, 6, 7, 8, 9, 10, 11, 12;] [IO=3E8h; IRQ=3, 4, 5, 6, 7, 8, 9, 10, 11, 12;] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 8, 9, 10, 11, 12;] 3.6.8 APM Configuration Chapter 3 ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)] Restore AC Power Loss [Power Off] This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E/PCI [Disabled] This item allows you to enable/disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] 3-44 Chapter 3: BIOS setup