Asus Z97-E USB 3.1 User Guide - Page 27
CPU and chassis fan connectors 4-pin CPU_FAN, 4-pin CHA_FAN1, 4-pin CHA, FAN2
View all Asus Z97-E USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1, 4-pin CHA_ FAN2, 4-pin CHA_FAN3) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. A B CPU_FAN CHA_FAN2 A B C CPU FAN PWM CPU FAN IN CPU FAN PWR GND CHA FAN PWM CHA FAN IN CHA FAN PWR GND Z97-E/USB 3.1 D C D CHA_FAN1 CHA_FAN3 GND CHA FAN PWR CHA FAN IN CHA FAN PWM CHA FAN PWM CHA FAN IN CHA FAN PWR GND Z97-E/USB 3.1 Fan connectors Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 1 A (12 W) fan power. • The CPU_FAN connector and CHA_FAN connectors support the ASUS FAN Xpert 3 feature. • The CPU fan connector detects the type of CPU fan installed and automatically switches the control modes. To configure the CPU fan's control mode, go to Advanced Mode > Monitor > CPU Q-Fan Control item in BIOS. • The chassis fan connectors support DC and PWM modes. To set these fans to DC or PWM, go to Advanced Mode > Monitor > Chassis Fan 1/2/3 Q-Fan Control items in BIOS. ASUS Z97-E/USB 3.1 1-17