Audiovox APS02BT2 Programming Guide
Audiovox APS02BT2 - Car Transmitter For APS15CH/APS25CH Manual
 |
UPC - 044476005121
View all Audiovox APS02BT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Audiovox APS02BT2 manual content summary:
- Audiovox APS02BT2 | Programming Guide - Page 1
please follow the programming instructions listed on pages two and three of this manual. These transmitter buttons can be arranged for the Lock Function on the large button and the unlock function on the small button. In this case, the combination of both buttons operated simultaneously will control - Audiovox APS02BT2 | Programming Guide - Page 2
& or horn. Non alarm models will flash the parking lights only to confirm the transmitter code has been learned and stored. TO PROGRAM ADDITIONAL TRANSMITTERS: 1. Enter the vehicle, and turn the ignition key to the "on" position. 2. Press and release the valet push-button switch three times. 3. The - Audiovox APS02BT2 | Programming Guide - Page 3
. 9. Press and release the valet push-button switch one time. 10. The dash mounted LED will flash 3 times, and the siren will "chirp" indicating that the system is ready to accept programming for channel 2, or the pulsed ground output for remote trunk release, remote car starter, etc. 11. Press - Audiovox APS02BT2 | Programming Guide - Page 4
note of the orientation of the + and - contacts and dispose of the battery properly. 3. Install the new (type GP23A) battery, taking care to orient the + and contacts properly. 4. Replace the transmitter cover, taking care not to damage the LED or switches on the circuit board. 128-6463 4 of 16 - Audiovox APS02BT2 | Programming Guide - Page 5
Expiration Date Credit card purchasers can order additional or replacement transmitters by phone. Simply dial 1 - 800 - 645 - 4994, and follow the instructions from the operator interface. 9. Mail this form and your check, to : Audiovox Corporation 150 Marcus Blvd. Hauppauge, N.Y. 11788 Attn - Audiovox APS02BT2 | Programming Guide - Page 6
Model: APS02BT2 GUIDE DE PROGRAMMATION DE -dessous. Pour programmer les canaux 2 et 3, suivez svp les instructions de programmation énumérées aux pages deux et trois de ce boutons actionnés simultanément commandera une fonction alternative s'installé dans votre véhicule. Réglages de boutons d'é - Audiovox APS02BT2 | Programming Guide - Page 7
la clé de contact pour la mettre sur "marche". 2. Appuyez sur et libérez le commutateur à bouton-poussoir de valet trois fois. 3. La DEL du tableau de bord clignote une fois puis l'alarme émet un seul signal, indiquant que le canal 1 du système est prêt à être programmé (activation/désactivation et - Audiovox APS02BT2 | Programming Guide - Page 8
le commutateur à bouton-poussoir de valet une fois. 10. La DEL du tableau de bord clignote tres fois puis l'alarme émet tres signal, indiquant que alarme), l'alarme n'émet aucun signal EFFACEMENT DES ÉMETTEURS S'ILS ONT ÉTÉ PERDUS OU VOLÉS: NOTE: Avant que vous commenciez à effacer le transmitter - Audiovox APS02BT2 | Programming Guide - Page 9
n/ns désiré sont maintenant supprimés. PROGRAMMATION De REPRIORITIZING A TRANSMITTER: Pour reprogrammer un canal de récepteur avec un émetteur diff . Cette DEL peut servir à indiquer la condition des piles de la batterie. On remarque une diminution de la portée de l'émetteur lorsque les piles - Audiovox APS02BT2 | Programming Guide - Page 10
inclure la Sales Tax convenable.) 6. Moyen de paiement (cocher la case correspondante instructions de l'opérateur électronique. 9. Expédier le formulaire de commande avec votre moyen de paiement à l'adresse ci-dessous: Audiovox Corporation 150 Marcus Blvd. Hauppauge, NY 11788, USA Attn: TRANSMITTER - Audiovox APS02BT2 | Programming Guide - Page 11
Modelo: APS02BT2 GUÍA DE PROGRAMACIÓN DEL TRANSMISOR El brazo, cerradura/desarma, abre funciones. El arreglo sugerido del programa se enumera abajo. Para programar los canales 2 y 3, siga por favor las instrucciones de programación enumeradas en las páginas dos y tres de este manual. Estos botones - Audiovox APS02BT2 | Programming Guide - Page 12
contacto poniéndola en la posición "on". 2. Active el interruptor de botón del valet tres veces 3. El LED destellará una vez, y la sirena sonará una vez concretó la programación del canal 1. 6. Active el interruptor de botón del valet una vez 7. El diodo LED montado en el tablero se encenderá 2 veces - Audiovox APS02BT2 | Programming Guide - Page 13
SE HAN ROBADO: Antes de que usted comience a borrar el transmitter(s) perdido o robado, tenga disponible todos los transmisores que usted trabajo. 2. En el plazo de 10 segundos, presione y lance el interruptor de valet/ program tres veces. (se ha entrado la sirena emite 1 chirrido corto que indica el - Audiovox APS02BT2 | Programming Guide - Page 14
transmisores ahora se borran de memoria. PROGRAMACIÓN De REPRIORITIZING A TRANSMITTERS: Reprogramar un canal del receptor con un diverso botón del contactos + y - al deshacerse de la misma en la forma adecuada. 3. Instale la pila nueva (tipo GP23A), fijándose en colocar los contactos + y - - Audiovox APS02BT2 | Programming Guide - Page 15
THIS PAGE LEFT BLANK INTENTIONALLY 128-6463 15 of 16 - Audiovox APS02BT2 | Programming Guide - Page 16
FORMULARIO PARA PEDIR EL TRANSMISOR DE 2 BOTONES MODELO APS02BT2 IMPORTANTE: Para que podemos acelerar su pedido, sírvase escribir del operador. 9. Envíe este formulario y el cheque por correo a: Audiovox Corporation 150 Marcus Blvd Hauppauge, NY 11788 Attn: TRANSMITTER DEPARTMENT 128-6463 16 of 16
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
128-6463
1 of 16
Button
Channel
System Function
Large
Button
# 1
Small
Button
# 2
Or If Programmed
Both Buttons
1
2
or
3
3
Remote Arm/Disarm
Remote Emergency Panic
Door Lock/Unlock (Optional)
Unlock
or
Pulsed Output
*(Optional Devices)
Pulsed Output
* (Optional Devices)
* Some of the more common accessories for these channels are;
AS 9075
Remote Car Starter
AS 9256
Remote Trunk Release Relay
AS 9154
Remote Garage Door Interface
AS 9153
Remote Window Roll Up
MODEL: APS02BT2
TRANSMITTER PROGRAMMING GUIDE
The transmitters included in the security system kit are pre-programmed at
the factory, with button # 1 assigned to the Arm, Lock / Disarm, Unlock
functions.
The suggested program arrangement is listed below.
To program
channels 2 and 3, please follow the programming instructions listed on pages
two and three of this manual.
These transmitter buttons can be arranged for the Lock Function on the large
button and the unlock function on the small button.
In this case, the combination
of both buttons operated simultaneously will control a alternate function if
installed in your vehicle.
Factory Settings for Transmitter Buttons