Audiovox APS02BT2 Programming Guide - Page 1

MODEL: APS02BT2 TRANSMITTER PROGRAMMING GUIDE The transmitters included in the security system kit are pre-programmed at the factory, with button # 1 assigned to the Arm, Lock / Disarm, Unlock functions. The suggested program arrangement is listed below. To program channels 2 and 3, please follow the programming instructions listed on pages two and three of this manual. These transmitter buttons can be arranged for the Lock Function on the large button and the unlock function on the small button. In this case, the combination of both buttons operated simultaneously will control a alternate function if installed in your vehicle. Factory Settings for Transmitter Buttons Button Large Button # 1 Channel 1 System Function Remote Arm/Disarm Remote Emergency Panic Door Lock/Unlock (Optional) 2 Small or Button # 2 3 Unlock or Pulsed Output *(Optional Devices) Or If Programmed Both Buttons 3 Pulsed Output * (Optional Devices) * Some of the more common accessories for these channels are; AS 9075 AS 9256 AS 9154 AS 9153 Remote Car Starter Remote Trunk Release Relay Remote Garage Door Interface Remote Window Roll Up 128-6463 1 of 16