Audiovox ARRX18G Setup Guide - Page 17

3 Test the Hello activity with your devices. Once your remote is ready to test, the screen to the right appears. Carefully disconnect the remote from your PC. The remote screens guide you through testing this activity. 12:35 Press the power button on the next page to turn off or on your devices in this activity. Read about the test The first screen gives you some information about the test. Use the slider to go to the next screen. IMPORTANT: Make sure all your devices are off before you start. Activities 12:35 12:35 Sony TV Onkyo DVD DirecTV Satellite Box Harmon/Kardon Audio OK Activities Test individual power commands The second screen lets you test the power command you set for each device. Press the on-screen remote button for each device to see if it turns that device on. (If it does, make sure you turn it back off!) Only the first three devices are shown on this page. Use the slider to test the rest of your devices. IMPORTANT: If you notice one of your devices does not respond to the power command, make a note-you will need to change the power command you give to that device. Under your last device, there's is an on-screen OK button. Press OK to continue with the test. 17