Audiovox FPE2305 Operation Manual - Page 26

Setting System Setting System In TV Mode Adjusting Screen Aspect 1 Press Menu to display the menu main page. 2 Press CH5/6 repeatedly to select System item. 3 Press Enter to access the submenu. The Aspect Ratio item will be highlighted automatically. MAIN MENU Picture Sound CH System Aspect Ratio N/R VCR mode Default 4 Press Enter repeatedly to select a desired aspect ratio. OSD You can select the image aspect ratio between 4:3, 16:9, Panorama and Zoom. TVPC 4:3 -- For 4:3 signal format. This mode displays a 4:3 picture at its standard 4:3 size Setup 16:9 without any stretching. 16:9 -- For 16:9 signal format. This mode displays 16:9 aspect ratio picture. Panorama -- In this mode the picture is progressively stretched toward each side of the screen. Zoom -- For 4:3 letterbox signal format. This mode stretches the picture horizontally and crops the top and bottom black bars of the picture. Note: You may quickly select the screen aspect by using the Screen button on the remote control. Reducing Picture Noise 1 Press Menu to display the menu main page. 2 Press CH5/6 repeatedly to select System item. 3 Press Enter to access the submenu. 4 Press CH5/6 repeatedly to select N/R item. 5 Press Enter to select Off, Auto, Strong, Middle or Weak. Sometimes a noisy picture may appear on the screen because of poor signal. This function helps to enhance the picture quality by reducing the noise. MAIN MENU Picture Sound CH System Aspect Ratio N/R VCR mode Default OSD TVPC Setup Auto VCR mode 1 Press Menu to display the menu main page. 2 Press CH5/6 repeatedly to select System item. 3 Press Enter to access the submenu. 4 Press CH5/6 repeatedly to select VCR mode item. 5 Press Enter to select On or Off. When you are watching VCR program type or receiving weak signal, please set the "VCR mode" item to "On". It helps to obtain a better synchronization and improve MAIN MENU Picture Sound CH System Aspect Ratio N/R VCR mode Default OSD TVPC Setup On Loading Default Values You may quickly load default values by using the Default item. 23