Audiovox FPE2305 Operation Manual - Page 32

TVPC Operations Viewing the TVPC The TVPC function is available only when the main frame is in D-Sub mode and the vertical frequency is 60 Hz. 1 Press Menu to display the menu main page. 2 Press CH5/6 repeatedly to select TVPC item. 3 Press Enter to access the submenu. The TVPC On/Off item will be highlighted automatically. 4 Press Enter to select On or Off. Note: 4You may quickly open or close TVPC frame by directly by using the TVPC button. 4Audio is from the main picture only. MAIN MENU Picture Sound CH System OSD TVPC On/Off Source H Position V Position Size PBP TVPC On Setup Main Frame Selecting the Signal Source for the TVPC Frame 1 Press Menu to display the menu main page. 2 Press CH5/6 repeatedly to select TVPC item. 3 Press Enter to access the submenu. 4 Press CH5/6 repeatedly to select Source item. 5 Press Enter repeatedly to select signal source for the TVPC frame. You may select RF, Video1, Video2, SVideo or YPbPr for the TVPC Frame. TVPC Frame MAIN MENU Picture Sound CH System OSD TVPC Setup TVPC On/Off Source H Position V Position Size PBP RF Note: You may quickly select signal source for the TVPC frame by using the P.S. button. Changing Channels for the TVPC Frame When the TVPC frame is in TV mode, press the up or down button to change channels. When you press the up or down, the unit changes channels in sequence. You will see all the channels that the unit has memorized. You will not see channels that were erased. 29