Audiovox GMRS7015RC Owners Manual - Page 19
and the LO icon appears on the display.
UPC - 044476040740
View all Audiovox GMRS7015RC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Press and hold the MODE/SCANNER button for 2 seconds; the scanner icon ( ) will appear, together with a frequency. (All channels are set to 450MHz at initial frequency.) Channel Selection Momentarily press the MODE/SCANNER button (12) once; the memory channel number flashes. To select the programmable memory channel: - Press the Up button (10) briefly to move to the next higher memory channel number. - Press the Down button (11) briefly to move to the next lower memory channel number. - Press the PTT button momentarily to confirm selection. Scanner Function Your GMRS7015RC can search for any active scan frequencies from 450MHz to 469.9875MHz in 6.25kHz (LO) steps or 12.5kHz (Hi) steps. To search for active memory frequencies: - Select memory channel positions 1 to 20 using the Up/Down buttons. (450MHz is set to all channels as a initial default frequency.) Turn off power. - Press and hold the Down button together with the Scan (S) button to access frequency search mode in 6.25kHz steps; the unit powers up and the LO icon appears on the display. - To access frequency search mode in 12.5kHz steps, turn off power; then press and hold the Up button together with the Scan (S) button; the HI icon appears on the display. - Use the Up/Down buttons for frequency selection in 6.25kHz or 12.5kHz steps, or press and hold the Up/Down buttons to accelerate up/down freqency search in 100kHz steps. - Momentarily press the Scan (S) button to initiate scan activity. NOTE: The scan will begin at the last stored frequency and continue in 6.25kHz or 12.5kHz steps until the PTT button is pressed. 19 128-7961 19 of 28