Audiovox XMCK5 User Guide - Page 27

Auto Tune Mode

Page 27 highlights

using your XpressEZ XpressEZ user guide0407.qxp:Layout 1 5/9/07 12:33 PM Page 27 27 Your XpressEZ can help you aim the antenna to pull in the strongest possible signal. 1. Press menu » Antenna Aiming. 2. As you adjust the antenna the "Satellite" and "Terrestrial" signal bars will change. Find the position that gives the strongest signal strength on either "Satellite" or "Terrestrial." 3. The antenna aiming display remains as long as it's needed to help you position the antenna. When you've found the best position, press menu to back out. Auto Tune Mode By default, Auto Tune is set to "Off" meaning, as you scroll through live XM channels you can preview the channel list before selecting a channel. XpressEZ does not switch to that channel until you press the XM button. By setting Auto Tune to "On" you can change this behavior so that XpressEZ automatically tunes to the channel that you're previewing. 1. Press menu » Auto Tune Mode. 2. Rotate the knob to the "On" option. 3. Press XM to confirm your selection. 4. Press the menu button to back out. XpressEZ will automatically tune to the channel that you preview.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Your Xpress
EZ
can help you aim the antenna to pull in the strongest possible signal.
1. Press
menu
²
Antenna Aiming
.
2. As you adjust the antenna the “Satellite”
and “Terrestrial” signal bars will change.
Find the position that gives the
strongest signal strength on either
“Satellite” or “Terrestrial.”
3. The antenna aiming display remains as long as it’s needed to help you position the
antenna. When you’ve found the best position, press
menu
to back out.
Auto Tune Mode
By default, Auto Tune is set to “Off” meaning, as you scroll through live XM channels
you can preview the channel list before selecting a channel. Xpress
EZ
does not switch
to that channel until you press the
XM
button. By setting Auto Tune to “On” you can
change this behavior so that Xpress
EZ
automatically tunes to the channel that you’re
previewing.
1. Press
menu
²
Auto Tune Mode.
2. Rotate the knob to the “On” option.
3. Press
XM
to confirm your selection.
4. Press the
menu
button to back out.
Xpress
EZ
will automatically tune to the channel that you preview.
27
using your Xpress
EZ
XpressEZ user guide0407.qxp:Layout 1
5/9/07
12:33 PM
Page 27