Behringer 297 DUAL PORTAMENTO/CV UTILITIES Quick Start Guide - Page 2

Installation, Specifications

Page 2 highlights

Installation The necessary screws are included with the module for mounting in a Eurorack case. Connect the power cable before mounting. Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threaded plates allow precise positioning of the module, but each plate should be positioned in the approximate relation to the mounting holes in your module before attaching the screws. Hold the module against the Eurorack rails so that each of the mounting holes are aligned with a threaded rail or threaded plate. Attach the screws part way to start, which will allow small adjustments to the positioning while you get them all aligned. After the final position has been established, tighten the screws down. Specifications Inputs Mixer signal input Type 8 x 3.5 mm TS jacks, DC coupled Impedance >50 kΩ, unbalanced Max input level ±10 V Portamento signal input Type 2 x 3.5 mm TS jacks, DC coupled Impedance 95 kΩ, unbalanced Max input level +10 V Portamento CV input Type 2 x 3.5 mm TS jacks, DC coupled Impedance 2 MΩ, unbalanced CV input level +10 V Outputs Mixer outputs, inverted & non inverted Type 8 x 3.5 mm TS jacks, DC coupled Impedance 50 Ω, unbalanced Max output level ±10 V Portamento signal output Type 2 x 3.5 mm TS jacks, DC coupled Impedance 250 Ω, unbalanced Max output level +10 V +10 V output Type 3.5 mm TS jack, DC coupled Impedance 1 kΩ, unbalanced Max output level +10 V -10 V output Type 3.5 mm TS jack, DC coupled Impedance 1 kΩ, unbalanced Max output level -10 V Controls Mixer input level Portamento time +10 V output voltage control -10 V output voltage control Power Power supply Current draw Physical Dimensions Rack units Weight -∞ to unity gain 10 ms to 3 s 0 V to +10 V 0 V to -10 V Eurorack 70 mA (+12 V), 60 mA (-12 V) 38 x 81 x 129 mm (1.5 x 3.2 x 5.1") 16 HP 0.18 kg (0.4 lbs) LEGAL DISCLAIMER Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.

  • 1
  • 2

Installation
The necessary screws are included with the module for mounting
in a Eurorack case. Connect the power cable before mounting.
Depending on the rack case, there may be a series of fixed holes
spaced 2 HP apart along the length of the case, or a track that
allows individual threaded plates to slide along the length
of the case. The free-moving threaded plates allow precise
positioning of the module, but each plate should be positioned in
the approximate relation to the mounting holes in your module
before attaching the screws.
Hold the module against the Eurorack rails so that each of the
mounting holes are aligned with a threaded rail or threaded
plate. Attach the screws part way to start, which will allow
small adjustments to the positioning while you get them all
aligned. After the final position has been established, tighten the
screws down.
Specifications
Inputs
Mixer signal input
Type
8 x 3.5 mm TS jacks, DC coupled
Impedance
>50 kΩ, unbalanced
Max input level
±10 V
Portamento signal input
Type
2 x 3.5 mm TS jacks, DC coupled
Impedance
95 kΩ, unbalanced
Max input level
+10 V
Portamento CV input
Type
2 x 3.5 mm TS jacks, DC coupled
Impedance
2 MΩ, unbalanced
CV input level
+10 V
Outputs
Mixer outputs, inverted & non inverted
Type
8 x 3.5 mm TS jacks, DC coupled
Impedance
50 Ω, unbalanced
Max output level
±10 V
Portamento signal output
Type
2 x 3.5 mm TS jacks, DC coupled
Impedance
250 Ω, unbalanced
Max output level
+10 V
+10 V output
Type
3.5 mm TS jack, DC coupled
Impedance
1 kΩ, unbalanced
Max output level
+10 V
-10 V output
Type
3.5 mm TS jack, DC coupled
Impedance
1 kΩ, unbalanced
Max output level
-10 V
Controls
Mixer input level
-∞ to unity gain
Portamento time
10 ms to 3 s
+10 V output voltage control
0 V to +10 V
-10 V output voltage control
0 V to -10 V
Power
Power supply
Eurorack
Current draw
70 mA (+12 V), 60 mA (-12 V)
Physical
Dimensions
38 x 81 x 129 mm
(1.5 x 3.2 x 5.1")
Rack units
16 HP
Weight
0.18 kg (0.4 lbs)
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and
other information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone
and Coolaudio are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at musictribe.com/warranty.