Behringer DEQ2496 Quick Start Guide - Page 10

18 ULTRACURVE PRO DEQ2496 Specifications Analog Inputs Type Connector Impedance Max. input level CMRR Analog Outputs (Main) Type Connector Impedance Max. output level Analog Outputs (Aux) Type Connector Impedance Max. output level System Specifications Frequency range Signal-to-noise ratio THD Crosstalk Bypass Type Measurement Microphone Input Type Input impedance Max. input level (LINE) Max. input level (MIC) Phantom power Digital Input 1 Type Standard Input impedance Nom. input level Digital Input 2 Type Standard Digital Input 1 Type Standard Impedance Output level Digital Input 2 Type Standard Sync Input Type Standard Input impedance Nom. level MIDI Interface Type Implementation Digital Processing Converter Sample rate Graphic Equalizer (GEQ) Type Frequency range Bandwidth Control range electronically balanced XLR 22 kΩ at 1 kHz +12 or +22 dBu, switchable 40 dB typ. servo-balanced XLR 100 Ω at 1 kHz +12 or +22 dBu, switchable servo-balanced ¼" stereo jack 100 Ω at 1 kHz +12 dBu 10 Hz to 35 kHz (-1 dB) @ 96 kHz sampling rate > 113 dB main input/output > 107 dB aux output 0.007 % typ. @ +4 dBu, 1 kHz, unity gain < -92 dB/-95 dB Relay, hard-bypass in case of power failure electronically balanced 2 kΩ variable from -14 dBu to +22 dBu variable from -42 dBV/Pa to -6 dBV/Pa +15 V, switchable XLR transformer-balanced AES/EBU or S/PDIF 110 Ω 0.2 - 5 V peak-to-peak TOSLINK optical AES/EBU or S/PDIF XLR transformer-balanced AES/EBU or S/PDIF 110 Ω 3.5 V peak-to-peak TOSLINK optical AES/EBU or S/PDIF BNC Wordclock (1 x sample rate) 50 kΩ 2 - 6 V peak-to-peak 5-pole DIN jacks In/Out/Thru cf. MIDI implementation chart 24-bit Delta-Sigma, 64/128-oversampling (AKM) 44.1, 48, 88.2, 96 kHz digital 1/3-oct EQ 20 Hz to 20 kHz, 31 1/3-oct. bands according to ISO frequencies 1/3-oct. +15 to -15 dB Parametric Equalizer (PEQ) Type Frequency range Bandwidth Control range Dynamic Equalizer (DEQ) Type Frequency range Bandwidth Control range Threshold Attack Release Ratio Feedback Destroyer (FBD) Type Filter Frequency range Bandwidth Control range Digital Delay Type Max. delay time Min. resolution Delay units Level Meter Type SPL Meter Weighting Microphone calibration Dynamics Type Threshold Attack Release Ratio Limiter Type Hold Threshold Release Real-Time Analyzer Type Frequency range Detectors Noise generator Display Type Backlighting Contrast Memory Presets Power Supply Mains voltage Power consumption Fuse Mains connector Dimensions/Weight Dimensions (H x D x W) Weight Shipping Weight max. 10 independent, fully parametric filters per channel 20 Hz to 20 kHz 1/10 to 10 oct., shelving filters (6 and 12 dB) +15 to -15 dB max. 3 independent, fully parametric filters per channel 20 Hz to 20 kHz 1/10 to 10 oct., shelving filters (6 and 12 dB) +15 to -15 dB variable from 0 to -60 dB 0 to 200 msec 20 to 4,000 msec 1:2 to 1:100 digital signal analysis for feedback identification max. 10 digital notch filters per channel, programmable or as automatic feedback suppression system 20 Hz to 20 kHz 1/10 to 1/60 oct. 0 to -60 dB digital stereo delay 300 ms, independently adjustable for each channel 0.02 ms seconds, meters or feet digital level meter with simultaneous graphic display of peak and RMS values and virtual analog VU meter dB (A), dB (C) or OFF -42 dBV/Pa to -6 dBV/Pa Expander or compressor with digital IGC (Interactive Gain Control) variable from 0 to -60 dB 0 to 200 msec 20 to 4,000 msec 1:1.1 to 1:100 Peak limiter (zero attack) 0 to 1,000 msec variable from 0 to -24 dB 20 to 4,000 msec digital 61-band FFT analyzer 20 Hz to 20 kHz, 61 bands according to ISO frequencies peak and average pink noise, levels from 0 to -60 dB 320 x 80 dot-matrix LC display LED, orange adjustable 64 memory locations with 16-character names, single modules can be recalled and saved 85 to 250 V~, 50/60 Hz 10 W typ. T 1A H Standard IEC receptacle approx. 44.5 x 482.6 x 215 mm (1.75 x 19 x 8.5") approx. 2.24 kg (4.9 lbs) approx. 3.09 kg (6.8 lbs) Quick Start Guide 19