Behringer DIGITAL MIXER X32 User Manual - Page 10
Input Channels 1-32, Aux Return Channels 1-8, Output Signals, sends, config
View all Behringer DIGITAL MIXER X32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 X32 DIGITAL MIXER Preliminary User Manual Ch01 01 01: 0:00 14:09 A: S16 A: 48K - 0:00 B: - C: X-USB : 37 home analog out aux out p16 out card out aes50-a aes50-b Analog Output Output 01 Output 02 Output 03 Output 04 Output 05 Output 06 Output 07 Output 08 *Output 09 *Output 10 *Output 11 *Output 12 *Output 13 *Output 14 Edit Output Assignment Current Setting Category MixBus OFF Main (LRC) Mix Bus Matrix Direct Out Monitor Processed Output OFF Main L Main R Main C/M Main Bus 01 Main Bus 02 Main Bus 03 Main Bus 04 Main Bus 05 Main Bus 06 Main Bus 07 Main Bus 08 Main Bus 09 Signal Tap Pre EQ Post EQ Pre Fader Post Fader 0.3 ft 0.10 m 0.3 ms Delay Delay Select Select Select Assign Select Set Delay 0.3 ms Delay Output Signals can be freely assigned from any internal signal to any of the following outputs: • 16x analog local XLR outputs (with adjustable digital delay for time-alignment of speakers) • 6x auxiliary sends on ¼" TRS outputs + 2x AES/EBU outputs • 16x personal monitoring using the console's P-16 Bus output connector Any and all of the above signals can also be mirrored in blocks of 8 signals on either one of • 48x channels on AES50 port A • 48x channels on AES50 port B • 32x channels on X-USB interface card Ch01 01 01: 0:00 home con g gate clip -6 48V In -12 Reverse -18 -24 -30 -36 Link Lo Cut Source OFF -42 +0.0 dB 2.0 Hz Input 01 -48 Input 02 -54 Input 03 Input 04 Gain Lo Cut Input 05 Input 06 - 0:00 dyn t A: S16 B: - eq 14:11 A: 48K C: X-USB : 37 sends main Insert Position Delay Pre Ins 0.3 ft 0.10 m 0.03 ms Delay Post Insert OFF InsFX 1L InsFX 1R InsFX 2L InsFX 2R InsFX 3L InsFX 3L Gain +0.00 dB Link Lo Cut 20 Hz Lo Cut Source Input Select Delay 0.3 ms Delay Ins Pos PRE Insert Insert InsF Connect Input Channels 1-32 are pre-configured to use the first 32 input signals, but can be patched to use any other available signal on the audio engine as well, including mix bus/sub group outputs. Changes of the Channel Source can be made on the Preamp Config page. Aux Return Channels 1-8 are pre-configured to use the 6 aux input signals, and the two USB playback outputs, but can be patched to use any other available signal of the console as well. FX Return Channels 1L-4R control the 4 stereo output signals of side-chain FX1-4.