Behringer EURODESK SX4882 Manual - Page 27

27 EURODESK SX4882 User Manual 24. Specifications Main Channel Strip Mic input Type Mic E.I.N.1 (22 Hz - 22 kHz) @ 150 Ω source input shortened Distortion (THD + N) Gain range Max. input level Line input Type Gain range Max. input level Channel fader range Aux send gain range electronically balanced, discrete input circuit -129.0 dBu / -117.3 dBqp -132.0 dBu / -122.0 dBqp 0.007 % @ +4 dBu, 1 kHz, bandwidth 80 kHz +10 dB to +50 dB +12 dBu (+32 dBu @ PAD) electronically balanced 0 dB to +40 dB (-20 dB to +20 dB @ PAD) +22 dBu +10 dB to -85 dB / off 0 dB to +15 dB / off Equalizer Hi shelving Hi mid sweep Lo mid sweep Lo shelving Lo cut (HPF) 12 kHz, ±15 dB 300 Hz to 20 kHz, ±15 dB 50 Hz to 3 kHz, ±15 dB 80 Hz, ±15 dB 75 Hz, 12 dB/oct. Channel Direct Out Max. output level +22 dBu Noise @ 0 dB gain -94 dBu Output impedance 120 Ω Tape returns ¼" jacks, balanced / unbalanced, globally switchable from +4 dBu to ‑10 dBV Channel Inserts Max. in/out +22 dBu Channel to channel crosstalk -95 dB @ 1 kHz Mix B Channel Strip Gain range Hi shelving Lo shelving 0 dB to +15 dB / off 12 kHz, ±15 dB 80 Hz, ±15 dB Subgroup Section Noise2 bus noise @ fader 0 dB ‑102.5 dBr 24 chs. assigned (input B) & set @ 0 dB gain ‑92.5 dBr 16 chs. assigned (input B) & set @ 0 dB gain ‑94.5 dBr Submaster output max. output level +22 dBu, balanced / unbalanced Submaster insert max. output level +22 dBu Submaster insert max. input level +22 dBu Fader range +10 dB to ‑85 dB / off Main Mix Section Noise2 bus noise @ fader 0 dB ‑101.0 dBr 24 chs. assigned (input B) & set @ 0 dB gain ‑92.5 dBr 16 chs. assigned (input B) & set @ 0 dB gain ‑94.5 dBr Max. output level +28 dBu, XLR connector, balanced / +22 dBu, ¼" jacks, unbalanced Aux returns gain range 0 dB to +20 dB / off Aux sends max. output level +22 dBu System Data Distortion (THD + N) 0.007 % @ +4 dBu, 1 kHz, bandwidth 80 kHz < 0.02 %, 22 Hz to 22 kHz at normal operating levels, any input to any output, bandwidth 80 kHz Frequency response 20 Hz to 40 kHz ±1 dB (any input to any output) 10 Hz to 120 kHz ±3 dB Noise2 @ fader 0 dB ‑102.5 dBr 24 chs. assigned (input B) & set @ 0 dB gain ‑92.5 dBr 16 chs. assigned (input B) & set @ 0 dB gain ‑94.5 dBr behringer.com