Behringer EUROPOWER PMP2000 Manual - Page 9

9 EUROPOWER PMP2000 User Manual 4.4 Loudspeaker connections Your EUROPOWER is equipped with high-quality Neutrik Speakon-compatible loudspeaker connectors, which ensure safe and trouble-free operation. The Speakon connector was especially developed for high-power loudspeakers. Once it is plugged in, it safely locks into position and cannot be accidentally disengaged. It prevents the occurrence of electrical shock and ensures the correct polarity. Each of the connectors carries only the assigned single signal (see tab. 4.1/fi g. 4.6 and the information on the rear panel of the power mixer). Professional speaker connector (compatible with Neutrik Speakon connectors) 5. Wiring Examples Loudspeaker connection (FOH mix) PMP2000 rear panel (part view) 1+ 1+ 2- 1- 1- 2- 2+ front view 2+ rear view Fig. 4.5: Loudspeaker connector Please be sure to only use commercial Speakon cables (type NL4FC) for connecting your loudspeakers to the PMP2000. Please check the pin assignment of your loudspeakers and cables dependent on the PMP2000 speaker output you choose. RIGHT/MONO MAIN LEFT/MONITOR BRIDGE 1+ 1- 2+ 2- POS NEG - - POS NEG - - POS NEG - - Tab. 4.1: Polarity configuration of speaker connectors 2 x BEHRINGER EUROLIVE Stack (B1500 & B1020, both passive) Loudspeaker connection (monitor mix) PMP2000 front panel (part view) Footswitch 2 x BEHRINGER B300 (active) LEFT/MONITOR +1 RIGHT MONO MAIN +1 Fig. 5.1: PMP2000 as stereo amplifier (example) ◊ Please set the MODE switch (21) to "LEFT/RIGHT" for this application. 16 Ω 8 Ω 4 Ω -1 -1 BRIDGE +1 16 Ω 8 Ω 4 Ω 16 Ω 8 Ω +2 Fig. 4.6: PMP2000 loudspeaker connector assignment Loudspeaker connection enabling both mono FOH and mono monitor mixes PMP2000 rear panel (part view) 2 x BEHRINGER EUROLIVE B1520 (passive) Fig. 5.2: PMP2000 as double mono amplifier (example) 2 x BEHRINGER EUROLIVE F1520 (passive)