Behringer FEX800 User Manual - Page 12
Audio Connections
View all Behringer FEX800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
MINIFEX FEX800 Fig. 4.3: Connecting the MINIFEX to an amplifier or D.I. box 5. AUDIO CONNECTIONS There are various ways to integrate the FEX800 into your set-up. Depending on the application in question, you will need different sets of connecting cables. The cables to use are described below. 5.1 Connection with insert cables Please use standard insert cables equipped with 1/4" connectors to connect the MINIFEX to the insert path of a mixing console. These Y cables have two 1/4" TS connectors at one end, and one 1/ 4" TRS connector at the other. Connect the plug marked Send to the INPUT L jack on the effects unit. Connect the Return plug to the OUTPUT L jack on the device. Connect the TRS connector to the insert jack of the channel strip on the mixing console. Use two insert cables for stereo subgroups and main-mix inserts. The second cable must be connected to the INPUT/OUTPUT R jacks of the FEX800. 12 5. AUDIO CONNECTIONS