Behringer UB1222FX-PRO User Manual - Page 13
Installation
View all Behringer UB1222FX-PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
EURORACK UB1222FX-PRO 4.2.1 Audio connections Please use commercial RCA cables to wire the 2-track inputs and outputs. You can, of course, also connect unbalanced devices to the balanced input/outputs. Use either mono plugs, or ensure that ring and sleeve are bridged inside the stereo plug (or pins 1 & 3 in the case of XLR connectors). + Caution! You must never use unbalanced XLR connectors (pins 1 and 3 connected) on the MIC inputs if you intend to use the phantom power supply. Fig. 4.5: Insert send return 1/4" TRS connector Fig. 4.2: XLR connections Fig. 4.6: 1/4" TRS connector for headphones Fig. 4.3: 1/4" TS connector Fig. 4.4: 1/4" TRS connector 4. INSTALLATION 13
13
EURORACK UB1222FX
-PRO
4. INSTALLATION
4.2.1 Audio connections
Please use commercial RCA cables to wire the 2-track inputs
and outputs.
You can, of course, also connect unbalanced devices to the
balanced input/outputs. Use either mono plugs, or ensure that
ring and sleeve are bridged inside the stereo plug (or pins 1 & 3
in the case of XLR connectors).
+
Caution! You must never use unbalanced XLR
connectors (pins 1 and 3 connected) on the MIC
inputs if you intend to use the phantom power
supply.
Fig. 4.2: XLR connections
Fig. 4.3: 1/4" TS connector
Fig. 4.4: 1/4" TRS connector
Fig. 4.5: Insert send return 1/4" TRS connector
Fig. 4.6: 1/4" TRS connector for headphones