Beltronics BEL975R Owners Manual - Page 3

Profile of Features 1. Remote Control Panel Unit: compact design fits discretely and easily in any vehicle. 2. PWR (Power) Button: pressing PWR briefly will turn the unit ON. Pressing PWR a second time will cancel the power-up test sequence. 3. H/C (Highway/City) Indicator: illuminates green for highway mode, and amber for the City X mode. City X/K/Ka is confirmed by the flashing green/amber LED, followed by solid illuminator of the amber LED. 4. DRK (Bright/Dim/Dark) Button: provides dim or dark settings of the LED display for discreet night travel. Audio alerts are not affected by this mode. 5. AUD (Audio-Mute) Button: provides manual muting of X, K, Super Wideband Ka Radar and SWS alerts. Pressing and holding the AUD button will change the audio level. 6. CTY (City/Highway) Button: minimizes unwanted X band alerts without reducing sensitivity. City X/K/Ka reduces falsing on all three bands. 4 7. X/K/Ka/SWS Band Visual Alerts: the alert received is confirmed by the illumination of the appropriate LED. 8. Four-LED Display: LEDs illuminate sequentially to confirm signal strength of Radar signals. A different alert pattern confirms detection of Laser and Safety Warning System. 9. Audio Speaker: all audible alerts are emitted from this location. 10. Antenna Sensor: contains the electronics which detect police Radar. This antenna sensor installs within the engine compartment of the vehicle. 11. Antenna Face: receiving portion of the antenna sensor must have a clear, unobstructed view of the road ahead. 12. Front Laser Sensor: with 11' cable mounts onto the windshield using the supplied suction cup. 13. Rear Laser Sensor: with 17' cable mounts to rear window of vehicle. 14. Windshield Accessory Cover: remove the cover to insert the suction cup mount. 15. Optical Opening: Laser signals are received at this side of the Laser sensor which must have a clear, unobstructed view of the road ahead. Description of Features Power-on Test Sequence Each time your unit is turned on, alerts for Laser, X, K, Ka and Safety Warning System are presented briefly. This is immediately followed by the status of the four Selectable Features: 1. Auto Mute - a clicking tone confirms of feature is engaged. 2. Safety Warning System - illumination if the green "S" LED confirms if feature is engaged. 3. X/K/Ka Bands - illumination of the appropriate LED confirms if band is activated. Full illumination of four signal strength LEDs, coupled with the illumination of 5 the Ka LED confirms Super Wideband Ka mode.